MBRF16150 C0G Schottky Diode Equivalent & Substitute Parts

Part Overview

The MBRF16150 C0G is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 150 V DC reverse voltage and 16 A average rectified current in a through-hole TO-220-2 package. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent alternatives for ongoing design support and procurement requirements. Substitute parts must maintain identical electrical specifications and mechanical compatibility to ensure direct replacement capability in existing circuit designs.

Substiute Parts

MBRF16150 C0G

Taiwan Semiconductor CorporationIn Stock: 854MBRF16150 C0G Datasheet

Current PartRFQ

MBRF16150

Taiwan Semiconductor CorporationIn Stock: 872MBRF16150 Datasheet

DirectRFQ

MBRF16150HC0G

Taiwan Semiconductor CorporationIn Stock: 867MBRF16150HC0G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBRF16150 C0G is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Voltage - DC Reverse (Vr) (Max): 150 V
• Current - Average Rectified (Io): 16 A
• Voltage - Forward (Vf) (Max) @ If: 950 mV @ 16 A
• Current - Reverse Leakage @ Vr: 100 µA @ 150 V
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Specifications:

• Mounting Type: Through Hole
• Package / Case: TO-220-2 Full Pack
• Supplier Device Package: ITO-220AC

Environmental & Compliance:

• Operating Temperature - Junction: -55°C to 150°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts identified below meet all specified electrical, mechanical, and compliance requirements without deviation.

Parameter Comparison

Engineering Selection Recommendations

MBRF16150 (Direct Substitute)

The MBRF16150 is the primary substitute for the discontinued MBRF16150 C0G. This part maintains active product status and carries identical electrical and mechanical specifications. All compliance certifications, including ROHS3 compliance and MSL rating, are equivalent. This part is suitable for direct replacement in all applications where the original MBRF16150 C0G was specified.

MBRF16150HC0G (Parametric Equivalent with Automotive Qualification)

The MBRF16150HC0G provides parametric equivalence with additional automotive-grade qualification (AEC-Q101). This variant maintains all electrical specifications and mechanical compatibility while offering enhanced reliability certification for automotive applications. Selection of this part is appropriate when automotive-grade components are required or when additional qualification documentation is necessary for design validation.

Both substitute parts are available in active inventory status, ensuring procurement reliability for ongoing production and design support requirements.

Frequently Asked Questions (FAQ)

Q: Can the MBRF16150 directly replace the discontinued MBRF16150 C0G?

A: Yes. The MBRF16150 is a direct substitute with identical electrical specifications (150 V, 16 A, 950 mV forward voltage, 100 µA reverse leakage) and mechanical packaging (TO-220-2 ITO-220AC). Both parts maintain ROHS3 compliance and MSL 1 rating. The primary difference is product status: MBRF16150 C0G is discontinued, while MBRF16150 is active.

Q: What is the difference between MBRF16150 and MBRF16150HC0G?

A: Both parts are parametrically equivalent with identical electrical performance and TO-220-2 packaging. The MBRF16150HC0G includes automotive-grade designation and AEC-Q101 qualification, making it suitable for automotive applications requiring enhanced reliability documentation. Standard industrial applications can use either part.

Q: Are these parts pin-compatible?

A: Yes. All three parts use the TO-220-2 Full Pack configuration with ITO-220AC supplier device package designation. Through-hole mounting and lead configuration are identical, enabling direct PCB-level substitution without layout modification.

Q: What is the operating temperature range for these diodes?

A: The junction operating temperature range is -55°C to 150°C for all three parts. This specification applies to the semiconductor junction and must be considered in thermal design calculations for the application circuit.

Q: Are these parts RoHS compliant?

A: Yes. All three parts carry ROHS3 compliance certification. REACH status is unaffected for all variants. These parts meet environmental regulatory requirements for commercial and industrial applications.

Q: What is the reverse recovery time specification?

A: All three parts are classified as Fast Recovery Schottky diodes with recovery time ≤ 500 ns at currents > 200 mA (Io). This specification ensures rapid switching performance suitable for high-frequency rectification applications.

Q: Can MBRF16150HC0G be used in non-automotive applications?

A: Yes. The MBRF16150HC0G meets all electrical and mechanical requirements for standard industrial applications. The automotive qualification is an additional certification that does not restrict use in non-automotive designs. Selection can be based on availability and cost considerations.