MBRF1560CT Equivalent & Substitute Parts

Part Overview

The MBRF1560CT is a Schottky diode array manufactured by Taiwan Semiconductor Corporation, configured as a 1 Pair Common Cathode arrangement with a 60 V DC reverse voltage rating and 15 A average rectified current per diode. The device is packaged in a TO-220-3 Full Pack with isolated tab for through-hole mounting applications. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified based on matching electrical specifications, mechanical packaging, and thermal operating ranges. Alternative sources provide design flexibility, supply chain redundancy, and component availability across multiple manufacturers.

Substiute Parts

MBRF1560CT

Taiwan Semiconductor CorporationIn Stock: 2023MBRF1560CT Datasheet

Current PartRFQ

MBRF1560CT

Taiwan Semiconductor CorporationIn Stock: 2023MBRF1560CT Datasheet

DirectRFQ

MBRF1560CT-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1403MBRF1560CT-E3/45 Datasheet

SimilarRFQ

VFT3060C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 16598VFT3060C-E3/4W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBRF1560CT is determined by the following critical parameters:

Primary Matching Criteria:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io) (per Diode): 15 A
• Mounting Type: Through Hole
• Package / Case: TO-220-3 Full Pack, Isolated Tab

Secondary Compatibility Parameters:

• Operating Temperature - Junction range
• Voltage - Forward (Vf) characteristics
• Current - Reverse Leakage @ Vr
• RoHS and compliance certifications

Parts are grouped into two categories:

Direct Equivalent: MBRF1560CT (Taiwan Semiconductor Corporation) — Identical specifications across all electrical and mechanical parameters.

Functional Equivalent: VFT3060C-E3/4W (Vishay General Semiconductor - Diodes Division) — Matches all primary criteria with minor variations in forward voltage and reverse leakage characteristics within acceptable operating ranges.

Partial Substitute: MBRF1560CT-E3/45 (Vishay General Semiconductor - Diodes Division) — Matches package, configuration, and voltage rating but operates at reduced current capacity (7.5 A per diode versus 15 A), limiting application scope to lower-current designs.

Parameter Comparison

Engineering Selection Recommendations

MBRF1560CT (Taiwan Semiconductor Corporation) — Primary selection for direct replacement. Identical electrical and mechanical specifications. Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating. Suitable for all applications designed for the original MBRF1560CT specification.

VFT3060C-E3/4W (Vishay General Semiconductor - Diodes Division) — Functional equivalent for full-current applications (15 A per diode). Matches all primary electrical parameters with improved forward voltage characteristics (700 mV @ 15 A versus 750 mV @ 7.5 A). Higher reverse leakage current (1.2 mA @ 60 V) remains within acceptable limits for most rectification applications. Active product status with ROHS3 compliance. Designated as TMBS® series component. Suitable for direct substitution in designs requiring 15 A current capacity.

MBRF1560CT-E3/45 (Vishay General Semiconductor - Diodes Division) — Partial substitute for reduced-current applications only. Current rating limited to 7.5 A per diode, restricting use to designs operating at half the original current specification. Extended operating temperature range (-65 to 150 °C) provides advantage in low-temperature environments. Active product status with ROHS3 compliance. Not suitable for applications requiring full 15 A current capacity.

All three parts maintain identical package geometry (TO-220-3 Full Pack, Isolated Tab), voltage rating (60 V), and compliance certifications, enabling mechanical and electrical interchangeability within specified current and temperature parameters.

Frequently Asked Questions (FAQ)

Q: Can VFT3060C-E3/4W replace MBRF1560CT in all applications?

A: VFT3060C-E3/4W is a functional equivalent for applications requiring the full 15 A current rating per diode. Both parts share identical voltage ratings (60 V), package configuration (TO-220-3 Full Pack, Isolated Tab), and operating temperature range (-55 to 150 °C). The VFT3060C-E3/4W exhibits lower forward voltage (700 mV @ 15 A) and higher reverse leakage (1.2 mA @ 60 V) compared to the MBRF1560CT. These differences are within acceptable operating margins for standard rectification circuits.

Q: Is MBRF1560CT-E3/45 suitable as a substitute?

A: MBRF1560CT-E3/45 is a partial substitute limited to applications operating at 7.5 A or lower per diode. The current rating is reduced to half the original specification (7.5 A versus 15 A). This part is not suitable for designs requiring full 15 A current capacity. The extended operating temperature range (-65 to 150 °C) provides advantage in low-temperature applications.

Q: What are the key differences in reverse leakage current?

A: MBRF1560CT exhibits 300 µA reverse leakage at 60 V. VFT3060C-E3/4W exhibits 1.2 mA reverse leakage at 60 V. MBRF1560CT-E3/45 exhibits 1 mA reverse leakage at 60 V. Higher reverse leakage increases standby power dissipation and heat generation in low-current or idle operating conditions. Selection depends on application thermal budget and standby power requirements.

Q: Are all three parts mechanically interchangeable?

A: All three parts use identical TO-220-3 Full Pack with isolated tab packaging and ITO-220AB supplier device package designation. Pin configuration and mounting footprint are identical, enabling direct mechanical substitution on printed circuit boards designed for the MBRF1560CT.

Q: Do all parts meet the same compliance standards?

A: All three parts are ROHS3 compliant, REACH unaffected, and classified as MSL 1 (unlimited moisture sensitivity). All parts carry Active product status. Compliance certifications are identical across all three options.

Q: What is the forward voltage difference between parts?

A: MBRF1560CT and MBRF1560CT-E3/45 both specify 750 mV forward voltage at 7.5 A. VFT3060C-E3/4W specifies 700 mV forward voltage at 15 A. The lower forward voltage of the VFT3060C-E3/4W results in reduced power dissipation and heat generation during forward conduction, providing thermal efficiency advantage in high-current applications.

Q: Can these parts be used in parallel configurations?

A: Parallel operation of diodes requires matched forward voltage characteristics to ensure balanced current distribution. MBRF1560CT and MBRF1560CT-E3/45 share identical forward voltage specifications (750 mV @ 7.5 A), enabling parallel operation. VFT3060C-E3/4W exhibits different forward voltage characteristics (700 mV @ 15 A) and should not be paralleled with the other two parts without additional current-balancing circuitry.