MBRF10H200CT Equivalent & Substitute Parts

Part Overview

The MBRF10H200CT is a Schottky diode array manufactured by Taiwan Semiconductor Corporation, configured as 1 pair common cathode with 200 V DC reverse voltage rating and 10 A average rectified current per diode. The device is packaged in TO-220-3 Full Pack with isolated tab and is classified as Active product status with ROHS3 compliance. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing, inventory availability, or performance parameter adjustments within the specified electrical and mechanical constraints.

Substiute Parts

MBRF10H200CT

Taiwan Semiconductor CorporationIn Stock: 2016MBRF10H200CT Datasheet

Current PartRFQ

MBRF10200CT

SMC Diode SolutionsIn Stock: 18616MBRF10200CT Datasheet

DirectRFQ

VF20200C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 17405VF20200C-E3/4W Datasheet

SimilarRFQ

VF20200G-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 1008VF20200G-E3/4W Datasheet

SimilarRFQ

VF30200C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 2225VF30200C-E3/4W Datasheet

SimilarRFQ

VFT10200C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 9600VFT10200C-E3/4W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBRF10H200CT are grouped based on strict electrical and mechanical parameter compatibility. All substitute parts maintain the following mandatory parameters:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 200 V
• Mounting Type: Through Hole
• Package / Case: TO-220-3 Full Pack, Isolated Tab
• Supplier Device Package: ITO-220AB
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)

Substitute parts are classified into two categories:

Direct Equivalent: MBRF10200CT maintains identical current rating (10 A per diode) and voltage specifications with equivalent performance characteristics.

Similar Substitutes: VF20200C-E3/4W, VF20200G-E3/4W, VF30200C-E3/4W, and VFT10200C-E3/4W are functionally compatible within the 200 V reverse voltage class but differ in current ratings, forward voltage characteristics, or reverse leakage specifications. These parts are suitable for applications where the specified current rating or thermal performance parameters allow for variation.

Parameter Comparison

Engineering Selection Recommendations

MBRF10200CT (SMC Diode Solutions) is the direct equivalent substitute for the MBRF10H200CT. Both parts maintain ROHS3 compliance and identical package specifications. The MBRF10200CT is suitable for direct replacement in applications where the 200 V reverse voltage and common cathode configuration are required. Forward voltage specification at 5 A (980 mV) is comparable to the main part at 10 A (970 mV). Reverse leakage at 1 mA is higher than the main part specification of 5 µA, which may impact applications with stringent leakage requirements. Operating temperature range extends to 150 °C maximum junction temperature, compared to 175 °C for the main part.

VF20200C-E3/4W and VF20200G-E3/4W (Vishay General Semiconductor - Diodes Division, TMBS® Series) maintain 10 A current rating and 200 V reverse voltage specifications. Both parts are ROHS3 compliant with identical package configuration. Forward voltage specifications are higher (1.6 V and 1.7 V respectively at 10 A) compared to the main part (970 mV at 10 A). Reverse leakage is significantly higher at 150 µA. Operating temperature range is limited to -40 to 150 °C. These parts are suitable for applications where forward voltage drop and reverse leakage variations are acceptable within circuit design margins.

VF30200C-E3/4W (Vishay General Semiconductor - Diodes Division, TMBS® Series) is rated for 15 A average rectified current per diode, exceeding the main part specification of 10 A. The 200 V reverse voltage and common cathode configuration are maintained. Forward voltage at 15 A is 1.1 V. ROHS3 compliance and identical package specifications are maintained. This part is suitable for applications requiring higher current capacity within the same voltage class and package footprint. Operating temperature range is -40 to 150 °C.

VFT10200C-E3/4W (Vishay General Semiconductor - Diodes Division, TMBS® Series) is rated for 5 A average rectified current per diode, below the main part specification of 10 A. The 200 V reverse voltage and common cathode configuration are maintained. Forward voltage at 5 A is 1.6 V. ROHS3 compliance and identical package specifications are maintained. This part is suitable for applications with reduced current requirements or where lower current density operation is preferred.

All substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity classification, ensuring compatibility with standard manufacturing and storage processes.

Frequently Asked Questions (FAQ)

Q: Can MBRF10200CT be used as a direct replacement for MBRF10H200CT?

A: MBRF10200CT is electrically and mechanically compatible with MBRF10H200CT. Both parts share identical 200 V reverse voltage rating, 1 Pair Common Cathode configuration, TO-220-3 Full Pack isolated tab package, and ROHS3 compliance. Forward voltage and reverse leakage specifications differ slightly; circuit design must account for these variations.

Q: What are the key differences between the main part and Vishay TMBS® series substitutes?

A: Vishay TMBS® series parts (VF20200C-E3/4W, VF20200G-E3/4W, VF30200C-E3/4W, VFT10200C-E3/4W) maintain 200 V reverse voltage and common cathode configuration but differ in current ratings and forward voltage characteristics. VF20200C-E3/4W and VF20200G-E3/4W match the 10 A rating but exhibit higher forward voltage (1.6-1.7 V vs. 970 mV). VF30200C-E3/4W provides 15 A capacity with 1.1 V forward voltage. VFT10200C-E3/4W is rated for 5 A with 1.6 V forward voltage. All maintain identical package specifications and ROHS3 compliance.

Q: Are all substitute parts compatible with the same PCB footprint?

A: All substitute parts use TO-220-3 Full Pack with isolated tab package configuration (ITO-220AB supplier device package). PCB footprint compatibility is maintained across all listed parts. Thermal management considerations may vary based on current rating and forward voltage characteristics.

Q: What is the impact of higher reverse leakage in substitute parts?

A: The main part MBRF10H200CT specifies 5 µA reverse leakage at 200 V. MBRF10200CT specifies 1 mA, while Vishay parts specify 150 µA. Higher reverse leakage increases standby current consumption and heat generation. Applications with stringent leakage requirements must evaluate circuit impact before substitution.

Q: Can VF30200C-E3/4W be used in place of MBRF10H200CT for higher current applications?

A: VF30200C-E3/4W is rated for 15 A average rectified current per diode, exceeding the main part specification of 10 A. The 200 V reverse voltage, common cathode configuration, and TO-220-3 package are maintained. Forward voltage at 15 A is 1.1 V. This part is suitable for applications requiring higher current capacity within the same voltage class and package footprint, provided circuit design accommodates the different forward voltage characteristic.

Q: What is the operating temperature range limitation for substitute parts?

A: The main part MBRF10H200CT operates from -55 to 175 °C junction temperature. MBRF10200CT operates to 150 °C. Vishay TMBS® series parts operate from -40 to 150 °C. Applications requiring operation below -40 °C or above 150 °C must use the main part or MBRF10200CT. Circuit thermal design must account for reduced maximum junction temperature in Vishay substitutes.

Q: Are all substitute parts ROHS3 compliant?

A: All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity classification, matching the main part specifications. Compliance certifications are maintained across all substitutes.