MBRF1060CTH Equivalent & Substitute Parts

Part Overview

The MBRF1060CTH is a Schottky diode array manufactured by Taiwan Semiconductor Corporation, configured as 1 pair common cathode with 60 V reverse voltage rating and 10 A average rectified current per diode. The device is packaged in TO-220-3 with isolated tab and features fast recovery characteristics suitable for high-frequency rectification applications. This part is discontinued at DiGi Electronics, necessitating identification of equivalent and substitute components that maintain functional compatibility within specified electrical and mechanical parameters.

Key Parameters

Parameter	Value
Diode Configuration	1 Pair Common Cathode
Technology	Schottky
Voltage - DC Reverse (Vr) (Max)	60 V
Current - Average Rectified (Io) (per Diode)	10 A
Voltage - Forward (Vf) (Max) @ If	900 mV @ 10 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	100 µA @ 60 V
Operating Temperature - Junction	-55°C ~ 150°C
Mounting Type	Through Hole
Package / Case	TO-220-3 Full Pack, Isolated Tab
Supplier Device Package	ITO-220AB
RoHS Status	ROHS3 Compliant
Grade	Automotive
Qualification	AEC-Q101

Substitute Part Grouping Explanation

Substitution of the MBRF1060CTH is determined by the following critical parameters: diode configuration (1 pair common cathode), reverse voltage rating (60 V), average rectified current per diode (10 A), package type (TO-220-3 with isolated tab), and mounting method (through hole). Forward voltage, reverse leakage current, and operating temperature range are secondary parameters that influence performance but do not prevent substitution when the primary parameters are met.

Substitute parts are grouped into two categories:

Parametric Equivalents: Parts with identical or superior ratings across all critical parameters. These parts maintain the same electrical performance envelope and can be used as direct replacements.

Similar Parts with Reduced Current Rating: Parts with 60 V reverse voltage and common cathode configuration but reduced average rectified current (7.5 A or 5 A). These parts are suitable only when circuit design permits operation at lower current levels.

Similar Parts with Increased Current Rating: Parts with 60 V reverse voltage and common cathode configuration but increased average rectified current (15 A). These parts provide enhanced current capacity and are suitable for all applications designed for the MBRF1060CTH.

Parameter Comparison

Part Number	Manufacturer	Diode Config	Vr (Max)	Io (per Diode)	Vf (Max) @ If	Reverse Leakage @ Vr	Tj (Operating)	Package	Product Status	AEC-Q101
MBRF1060CTH	Taiwan Semiconductor Corporation	1 Pair Common Cathode	60 V	10 A	900 mV @ 10 A	100 µA @ 60 V	-55°C ~ 150°C	TO-220-3, Isolated Tab	Discontinued	Yes
MBRF1060CT	Taiwan Semiconductor Corporation	1 Pair Common Cathode	60 V	10 A	900 mV @ 10 A	100 µA @ 60 V	-55°C ~ 150°C	TO-220-3, Isolated Tab	Active	Yes
MBRF1560CT-E3/45	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	7.5 A	750 mV @ 7.5 A	1 mA @ 60 V	-65°C ~ 150°C	TO-220-3, Isolated Tab	Active	Yes
MBRF1560CTHE3/45	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	7.5 A	750 mV @ 7.5 A	1 mA @ 60 V	-65°C ~ 150°C	TO-220-3, Isolated Tab	Active	Yes
MBRF2060CT-E3/45	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	10 A	800 mV @ 10 A	150 µA @ 60 V	-65°C ~ 150°C	TO-220-3, Isolated Tab	Active	No
MBRF2060CTHE3/45	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	10 A	800 mV @ 10 A	150 µA @ 60 V	-65°C ~ 150°C	TO-220-3, Isolated Tab	Active	Yes
MBRF2560CT-E3/45	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	15 A	750 mV @ 15 A	1 mA @ 60 V	-65°C ~ 150°C	TO-220-3, Isolated Tab	Active	No
MBRF2560CT/45	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	15 A	750 mV @ 15 A	1 mA @ 60 V	-65°C ~ 150°C	TO-220-3, Isolated Tab	Active	No
VFT1060C-E3/4W	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	5 A	700 mV @ 5 A	700 µA @ 60 V	-40°C ~ 150°C	TO-220-3, Isolated Tab	Active	No
VFT2060C-E3/4W	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	10 A	650 mV @ 10 A	850 µA @ 60 V	-55°C ~ 150°C	TO-220-3, Isolated Tab	Active	No
VFT2060G-E3/4W	Vishay General Semiconductor - Diodes Division	1 Pair Common Cathode	60 V	10 A (DC)	900 mV @ 10 A	700 µA @ 60 V	-55°C ~ 150°C	TO-220-3, Isolated Tab	Active	No

Engineering Selection Recommendations

Primary Recommendation: MBRF1060CT

The MBRF1060CT is the direct parametric equivalent to the MBRF1060CTH. Both parts are manufactured by Taiwan Semiconductor Corporation with identical electrical specifications: 60 V reverse voltage, 10 A average rectified current per diode, 900 mV forward voltage at 10 A, and -55°C to 150°C operating temperature range. The MBRF1060CT is currently active in production with 23,980 units in stock, providing immediate availability. Both parts carry AEC-Q101 automotive qualification and ROHS3 compliance. The only difference is packaging format (tube versus full pack), which does not affect electrical or mechanical compatibility.

Secondary Recommendation for Automotive Applications: MBRF2060CTHE3/45

The MBRF2060CTHE3/45 is suitable for applications requiring automotive qualification (AEC-Q101 certified). This part maintains the 60 V reverse voltage and 10 A average rectified current per diode, with slightly improved forward voltage characteristics (800 mV @ 10 A versus 900 mV @ 10 A). Operating temperature range extends to -65°C, providing enhanced low-temperature performance. The part is active in production with 1,102 units in stock.

Alternative for Reduced Current Applications: MBRF1560CTHE3/45

The MBRF1560CTHE3/45 is suitable only for applications where circuit design permits operation at 7.5 A average rectified current per diode. This part maintains 60 V reverse voltage and AEC-Q101 automotive qualification. Forward voltage is reduced to 750 mV @ 7.5 A, and reverse leakage is increased to 1 mA @ 60 V. Operating temperature range extends to -65°C. This part is active in production with 1,121 units in stock.

Alternative for Increased Current Capacity: MBRF2560CT-E3/45

The MBRF2560CT-E3/45 provides increased current capacity at 15 A average rectified current per diode while maintaining 60 V reverse voltage. Forward voltage is reduced to 750 mV @ 15 A. This part is not AEC-Q101 certified and is active in production with 2,450 units in stock. Use this part only when circuit design requires current capacity exceeding 10 A.

Not Recommended: VFT Series Parts

The VFT1060C-E3/4W and VFT2060C-E3/4W are not recommended as direct substitutes. The VFT1060C-E3/4W has reduced current rating (5 A) and narrower operating temperature range (-40°C to 150°C). The VFT2060C-E3/4W has improved forward voltage characteristics (650 mV @ 10 A) but increased reverse leakage (850 µA @ 60 V) and lacks automotive qualification. The VFT2060G-E3/4W matches the original forward voltage specification (900 mV @ 10 A) but has increased reverse leakage (700 µA @ 60 V) and lacks automotive qualification.

Frequently Asked Questions (FAQ)

Q: Can MBRF1060CT be used as a direct replacement for MBRF1060CTH?

A: Yes. Both parts are manufactured by Taiwan Semiconductor Corporation with identical electrical specifications and automotive qualification. The difference is packaging format (tube versus full pack), which does not affect electrical or mechanical compatibility. The MBRF1060CT is currently in active production.

Q: What is the difference between MBRF2060CTHE3/45 and MBRF1060CTH?

A: Both parts maintain 60 V reverse voltage and 10 A average rectified current per diode. The MBRF2060CTHE3/45 has slightly lower forward voltage (800 mV @ 10 A versus 900 mV @ 10 A), extended operating temperature range (-65°C to 150°C versus -55°C to 150°C), and carries AEC-Q101 automotive qualification. The MBRF2060CTHE3/45 is currently in active production.

Q: Can MBRF1560CTHE3/45 replace MBRF1060CTH in all applications?

A: No. The MBRF1560CTHE3/45 has reduced average rectified current rating (7.5 A per diode versus 10 A per diode). This part is suitable only for applications where circuit design permits operation at the lower current level. Verify circuit current requirements before substitution.

Q: What is the advantage of MBRF2560CT-E3/45 over MBRF1060CTH?

A: The MBRF2560CT-E3/45 provides increased current capacity at 15 A average rectified current per diode, compared to 10 A for the MBRF1060CTH. Both parts maintain 60 V reverse voltage and TO-220-3 package. Use this part only when circuit design requires current capacity exceeding 10 A. Note that this part does not carry AEC-Q101 automotive qualification.

Q: Why are VFT series parts not recommended as substitutes?

A: The VFT1060C-E3/4W has reduced current rating (5 A) and narrower operating temperature range. The VFT2060C-E3/4W and VFT2060G-E3/4W lack automotive qualification and have different reverse leakage characteristics. These parts do not provide equivalent performance for applications designed for the MBRF1060CTH.

Q: Are all substitute parts compatible with the TO-220-3 package footprint?

A: Yes. All listed substitute parts use TO-220-3 Full Pack with isolated tab package, maintaining mechanical and thermal compatibility with the original MBRF1060CTH design.

Q: What is the significance of AEC-Q101 qualification?

A: AEC-Q101 qualification indicates the part meets automotive industry reliability and quality standards. For automotive applications, select parts with AEC-Q101 certification: MBRF1060CT, MBRF1560CTHE3/45, or MBRF2060CTHE3/45.

Q: Can MBRF1060CTH be used in applications requiring extended temperature range?

A: The MBRF1060CTH operates from -55°C to 150°C. For applications requiring extended low-temperature operation, consider MBRF1560CTHE3/45 or MBRF2060CTHE3/45, which operate from -65°C to 150°C.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message