MBRF10100 Equivalent & Substitute Parts

Part Overview

The MBRF10100 is a Schottky rectifier diode rated for 100 V DC reverse voltage and 10 A average rectified current, packaged in a through-hole TO-220-2 configuration. This component is designed for fast recovery applications with a maximum forward voltage of 850 mV at 10 A and reverse leakage current of 100 µA at 100 V. The part is currently in active production status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Identification of equivalent and substitute parts is necessary to support design flexibility, supply chain continuity, and procurement optimization across manufacturing environments.

Substiute Parts

MBRF10100

Taiwan Semiconductor CorporationIn Stock: 5154MBRF10100 Datasheet

Current PartRFQ

MBRF10100

Taiwan Semiconductor CorporationIn Stock: 5154MBRF10100 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBRF10100 Schottky rectifier diode is determined by strict equivalence across the following critical electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Voltage - DC Reverse (Vr) (Max): 100 V minimum
• Current - Average Rectified (Io): 10 A minimum
• Voltage - Forward (Vf) (Max) @ If: 850 mV or lower at 10 A
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: 100 µA or lower at 100 V
• Technology: Schottky

Mechanical Equivalence Criteria:

• Mounting Type: Through Hole
• Package / Case: TO-220-2 Full Pack
• Operating Temperature - Junction: -55°C to 150°C minimum

Compliance Requirements:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts must satisfy all electrical parameters at or above the specified ratings and maintain identical mechanical packaging and thermal operating range. Compliance certifications must be equivalent or superior.

Parameter Comparison

Engineering Selection Recommendations

The MBRF10100 manufactured by Taiwan Semiconductor Corporation is the direct equivalent part for applications requiring a 100 V, 10 A Schottky rectifier diode in TO-220-2 through-hole packaging. This part maintains active production status and carries full ROHS3 compliance certification, confirming its suitability for current and future manufacturing environments.

Selection of this component is appropriate for applications requiring:

• Fast recovery Schottky rectification at 100 V DC reverse voltage
• 10 A average rectified current capacity
• Through-hole mounting in TO-220-2 package format
• Operating temperature range from -55°C to 150°C junction temperature
• Compliance with RoHS3 environmental standards

The part's MSL 1 rating indicates unlimited moisture sensitivity, eliminating moisture-related handling constraints during storage and assembly operations.

Frequently Asked Questions (FAQ)

Q: What defines electrical equivalence for the MBRF10100 Schottky rectifier diode?

A: Electrical equivalence requires matching or exceeding the following specifications: 100 V DC reverse voltage rating, 10 A average rectified current, 850 mV maximum forward voltage at 10 A, fast recovery speed of 500 ns or faster at currents exceeding 200 mA, and reverse leakage current of 100 µA or lower at 100 V. All parameters must be met simultaneously.

Q: Are there mechanical compatibility requirements for substitution?

A: Yes. Substitute parts must use identical through-hole mounting configuration and TO-220-2 full pack package format. The operating temperature range must support -55°C to 150°C junction temperature operation. Deviation from these mechanical specifications requires circuit board redesign and is not considered direct substitution.

Q: What compliance certifications are required for substitute parts?

A: Substitute parts must maintain ROHS3 compliance status. The MSL 1 (unlimited) moisture sensitivity rating must be preserved to ensure compatibility with standard handling and storage procedures. REACH unaffected status and EAR99 export classification should be maintained for supply chain consistency.

Q: Can parts with higher voltage or current ratings substitute for the MBRF10100?

A: Parts with higher voltage or current ratings are not considered direct substitutes. While they may function in the circuit, they represent design changes rather than equivalent substitution. Component selection must match the specified 100 V and 10 A ratings to maintain design intent and thermal management characteristics.

Q: Is the forward voltage specification critical for substitution?

A: Yes. The 850 mV maximum forward voltage at 10 A is a critical parameter. Parts with higher forward voltage will increase power dissipation and heat generation. Parts with lower forward voltage are acceptable from an electrical standpoint but represent a design change. Direct substitution requires matching this specification.

Q: What is the significance of the fast recovery specification?

A: The fast recovery specification (≤ 500ns at > 200mA) indicates switching speed capability. This parameter is essential for applications requiring rapid diode turn-off characteristics. Substitute parts must meet or exceed this speed specification to maintain circuit performance and prevent switching losses.