MBRD360T4G Equivalent & Substitute Parts

Part Overview

The MBRD360T4G is an active Schottky rectifier diode manufactured by onsemi, designed for surface mount applications in the DPAK package. This component operates at 60 V DC reverse voltage with a 3 A average rectified current rating and features fast recovery characteristics suitable for switching mode power supply applications. The part is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1) and REACH unaffected status.

Equivalent and substitute parts are identified to provide design flexibility, support supply chain continuity, and accommodate specific application requirements where alternative electrical or mechanical parameters remain within acceptable operating ranges.

Substiute Parts

MBRD360T4G

onsemiIn Stock: 22598MBRD360T4G Datasheet

Current PartRFQ

VS-30WQ06FNTR-M3

Vishay General Semiconductor - Diodes DivisionIn Stock: 10426VS-30WQ06FNTR-M3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBRD360T4G are identified based on strict electrical and mechanical parameter compatibility. The substitution logic is based on the following criteria:

Electrical Parameters:

• Voltage - DC Reverse (Vr) rating must equal or exceed 60 V
• Current - Average Rectified (Io) must equal or exceed 3 A
• Technology classification must be Schottky
• Speed characteristic must be Fast Recovery (≤ 500ns, > 200mA)
• Package and mounting type must be identical: TO-252-3 DPAK surface mount

Compliance Parameters:

• RoHS3 compliance required
• MSL rating of 1 (Unlimited) required
• REACH unaffected status required

The VS-30WQ06FNTR-M3 from Vishay General Semiconductor meets all substitution criteria with equivalent reverse voltage (60 V), higher average rectified current (3.5 A), identical package configuration (TO-252-3 DPAK), and matching compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The VS-30WQ06FNTR-M3 is a qualified substitute for the MBRD360T4G based on the following engineering criteria:

Electrical Compatibility: Both devices operate at identical 60 V DC reverse voltage and share Schottky technology with fast recovery characteristics. The substitute part carries a higher current rating (3.5 A versus 3 A), providing additional design margin in applications where the MBRD360T4G is specified. Forward voltage characteristics are within acceptable tolerance at the specified operating point.

Package and Mechanical Compatibility: Both parts utilize the TO-252-3 DPAK surface mount package with identical pin configuration and thermal characteristics, enabling direct board-level substitution without layout modifications.

Compliance and Regulatory Status: Both parts maintain ROHS3 compliance, unlimited moisture sensitivity level (MSL 1), and REACH unaffected status, satisfying identical regulatory and environmental requirements.

Temperature Operating Range: The MBRD360T4G operates across -65°C to 150°C, while the VS-30WQ06FNTR-M3 operates across -40°C to 150°C. Applications requiring operation below -40°C junction temperature must retain the MBRD360T4G.

Reverse Leakage Consideration: The VS-30WQ06FNTR-M3 exhibits higher reverse leakage current (2 mA at 60 V versus 200 µA at 60 V). Applications with stringent leakage requirements should evaluate this parameter against specific design constraints.

Frequently Asked Questions (FAQ)

Q: Can the VS-30WQ06FNTR-M3 directly replace the MBRD360T4G on existing PCBs?

A: Yes. Both devices use identical TO-252-3 DPAK surface mount packages with matching pin configurations and thermal tab placement. No PCB layout modifications are required for direct substitution.

Q: What is the primary difference between these two parts?

A: The VS-30WQ06FNTR-M3 carries a higher average rectified current rating (3.5 A versus 3 A) and exhibits higher reverse leakage current (2 mA versus 200 µA at 60 V). The MBRD360T4G supports a wider operating temperature range (-65°C to 150°C versus -40°C to 150°C).

Q: Are both parts suitable for ROHS3 and REACH-compliant applications?

A: Yes. Both the MBRD360T4G and VS-30WQ06FNTR-M3 are ROHS3 compliant with REACH unaffected status and unlimited moisture sensitivity level (MSL 1).

Q: Which part should be selected for applications requiring operation below -40°C?

A: The MBRD360T4G must be used for applications requiring junction temperatures below -40°C, as the VS-30WQ06FNTR-M3 is rated only to -40°C minimum.

Q: Does the higher reverse leakage of the VS-30WQ06FNTR-M3 affect circuit performance?

A: The impact of higher reverse leakage depends on specific application requirements. Applications with stringent leakage specifications should evaluate the 2 mA leakage current of the VS-30WQ06FNTR-M3 against design constraints. The MBRD360T4G with 200 µA leakage may be preferred in sensitive analog or precision applications.

Q: Are both parts available in the same packaging formats?

A: The MBRD360T4G is available in Cut Tape (CT) and Digi-Reel packaging. The VS-30WQ06FNTR-M3 is available in Tape & Reel (TR) format. Both use identical component packages (TO-252-3 DPAK).

Q: What is the forward voltage difference between these parts?

A: At 3 A forward current, the MBRD360T4G exhibits 600 mV maximum forward voltage, while the VS-30WQ06FNTR-M3 exhibits 610 mV maximum. This 10 mV difference is within typical tolerance for Schottky diode applications.