MBRB10150CT-13 Equivalent & Substitute Parts

Part Overview

The MBRB10150CT-13 is a Schottky diode array manufactured by Diodes Incorporated, configured as 1 pair common cathode with a maximum reverse voltage rating of 150 V and average rectified current of 5 A per diode. The device is housed in a TO-263-3 surface mount package (D2PAK with 2 leads plus tab) and is qualified to AEC-Q101 automotive standards. This part is currently in active production status with 1716 units in stock. Equivalent and substitute parts are identified to support component procurement flexibility, supply chain continuity, and design alternatives where electrical and mechanical parameters align with application requirements.

Substiute Parts

MBRB10150CT-13

Diodes IncorporatedIn Stock: 1791MBRB10150CT-13 Datasheet

Current PartRFQ

MBRB10150CT-13

Diodes IncorporatedIn Stock: 1791MBRB10150CT-13 Datasheet

Parametric EquivalentRFQ

VS-10CTQ150S-M3

Vishay General Semiconductor - Diodes DivisionIn Stock: 5340VS-10CTQ150S-M3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBRB10150CT-13 are identified based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Diode configuration: 1 pair common cathode
• Technology: Schottky
• Maximum reverse voltage (Vr): 150 V
• Average rectified current (Io): 5 A per diode
• Operating temperature range: -55°C to 175°C
• Package type: TO-263-3 / D2PAK / TO-263AB surface mount
• Reverse leakage current: 50 µA @ 150 V

Allowable Parameter Variations:

• Forward voltage (Vf) at 5 A: Tolerance within manufacturer specifications
• Recovery speed characteristics: Variations permitted within fast recovery classification
• Packaging format: Tape & Reel or Tube acceptable for same footprint
• Manufacturer: Different manufacturers permitted if all electrical and mechanical parameters match

Substitutes are grouped as parametric equivalents when all critical parameters align with the main part specification.

Parameter Comparison

Engineering Selection Recommendations

MBRB10150CT-13 (Primary Part - Diodes Incorporated)

This part is the primary reference component and remains the first choice for new designs and procurement. It carries active product status with established supply availability (1716 units in stock). The device meets AEC-Q101 automotive qualification and ROHS3 compliance requirements. Forward voltage specification of 890 mV @ 5 A establishes the baseline performance characteristic for this electrical class.

VS-10CTQ150S-M3 (Substitute - Vishay General Semiconductor)

This part qualifies as a parametric equivalent substitute. All critical electrical parameters match the primary part: 150 V reverse voltage, 5 A average rectified current, 50 µA reverse leakage, and -55°C to 175°C operating range. The package footprint is identical (TO-263-3 / D2PAK). Forward voltage is specified at 930 mV @ 5 A, representing a 40 mV increase over the primary part but within acceptable tolerance for Schottky diode technology. Both parts carry ROHS3 compliance and MSL 1 rating. The substitute is available in Tube packaging format versus Tape & Reel for the primary part; both formats are suitable for surface mount assembly. Supply availability for the substitute is higher (5299 units in stock). Selection between these parts is determined by procurement requirements, supply chain considerations, and packaging format preferences.

Frequently Asked Questions (FAQ)

Q: Can VS-10CTQ150S-M3 be used as a direct replacement for MBRB10150CT-13 in existing designs?

A: Yes. The VS-10CTQ150S-M3 is a parametric equivalent with matching electrical specifications (150 V, 5 A, common cathode configuration) and identical package footprint (TO-263-3 / D2PAK). The forward voltage difference of 40 mV (930 mV versus 890 mV at 5 A) is within normal Schottky diode tolerance and does not affect circuit compatibility for standard rectification applications.

Q: What is the difference between Tape & Reel and Tube packaging?

A: Both packaging formats contain the same electronic component in the same TO-263-3 surface mount package. Tape & Reel format is optimized for high-volume automated assembly lines with reel feeding systems. Tube format is suitable for lower-volume production, manual assembly, or component storage. The choice between formats depends on assembly process requirements and production volume, not electrical performance.

Q: Are both parts qualified for automotive applications?

A: The MBRB10150CT-13 carries explicit AEC-Q101 automotive qualification and Automotive grade designation. The VS-10CTQ150S-M3 specification data provided does not include automotive grade or AEC-Q101 qualification notation. For applications requiring automotive qualification, the MBRB10150CT-13 is the specified choice.

Q: What parameters must remain constant for substitution?

A: The following parameters must match exactly: diode configuration (1 pair common cathode), technology (Schottky), maximum reverse voltage (150 V), average rectified current (5 A per diode), operating temperature range (-55°C to 175°C), package type (TO-263-3 / D2PAK), and reverse leakage current (50 µA @ 150 V). Forward voltage and recovery speed characteristics may vary within manufacturer specifications.

Q: Can these parts be used in applications requiring higher current ratings?

A: No. Both parts are rated for 5 A average rectified current per diode. Use in applications exceeding this specification violates device ratings and may result in thermal failure or reduced reliability.

Q: What is the significance of MSL 1 (Unlimited) rating?

A: MSL 1 indicates unlimited shelf life without moisture bake-out requirements. These parts do not require special moisture control during storage or handling, simplifying inventory management and reducing preparation time before assembly.