Equivalent & Substitute Parts Reference for MBR760/45

Part Overview

The Vishay General Semiconductor MBR760/45 is a Schottky rectifier diode, rated for 60 V DC reverse voltage and 7.5 A average rectified current, in a TO-220-2 through hole package. This product is classified as obsolete, necessitating the identification and selection of substitute parts with matching key electrical and mechanical characteristics to ensure continuity in design and supply. Alternative models are required strictly due to the obsolete status of MBR760/45, and selection must be based only on provided technical data and compliance requirements.

Key Parameters

Parameter	Specification
Technology	Schottky
Voltage - DC Reverse (Vr) (Max)	60 V
Current - Average Rectified (Io)	7.5A
Voltage - Forward (Vf) (Max) @ If	750 mV @ 7.5A
Speed	Fast Recovery =< 500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	500 µA @ 60 V
Mounting Type	Through Hole
Package / Case	TO-220-2
Supplier Device Package	TO-220AC
Operating Temperature - Junction	-65°C ~ 150°C
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute or equivalent Schottky rectifier diodes for MBR760/45 are selected purely on:

Technology: Schottky
Maximum DC Reverse Voltage (Vr): 60 V
Average Rectified Current (Io): ≥7.5A
Maximum Forward Voltage (Vf) at required current
Reverse Leakage Current @ Vr consistency
Recovery speed criteria
Mounting type and package/case compatibility (TO-220-2, TO-220AC, Through Hole)
Operating junction temperature range
Compliance/certification status

Only parts matching these explicit key parameters are considered suitable substitutes.

Parameter Comparison

Part Number	Manufacturer	Technology	Vr (Max)	Io	Vf (Max) @ If	Speed	Reverse Leakage @ Vr	Mounting Type	Package/Case	Supplier Device Package	Operating Temp Junction	RoHS Status	Product Status
MBR760/45	Vishay	Schottky	60 V	7.5A	750 mV @ 7.5A	Fast Recovery ≤ 500ns, > 200mA (Io)	500 µA @ 60 V	Through Hole	TO-220-2	TO-220AC	-65°C ~ 150°C	RoHS non-compliant	Obsolete
MBR760-E3/45	Vishay	Schottky	60 V	7.5A	750 mV @ 7.5A	Fast Recovery ≤ 500ns, > 200mA (Io)	500 µA @ 60 V	Through Hole	TO-220-2	TO-220AC	-65°C ~ 175°C	ROHS3 Compliant	Active
MBR1060-BP	Micro Commercial Co	Schottky	60 V	10A	-	No Recovery Time > 500mA (Io)	150 µA @ 60 V	Through Hole	TO-220-2	TO-220AC	-55°C ~ 150°C	-	Active
MBR1060F-BP	Micro Commercial Co	Schottky	60 V	10A	750 mV @ 10A	Fast Recovery ≤ 500ns, > 200mA (Io)	500 µA @ 60 V	Through Hole	TO-220-2 Isolated Tab	ITO-220AC	-50°C ~ 150°C	-	Active
MBR1060G	onsemi	Schottky	60 V	10A	800 mV @ 10A	Fast Recovery ≤ 500ns, > 200mA (Io)	100 µA @ 60 V	Through Hole	TO-220-2	TO-220-2	-65°C ~ 175°C	ROHS3 Compliant	Active
MBR760	Diodes Incorporated	Schottky	60 V	7.5A	750 mV @ 7.5A	Fast Recovery ≤ 500ns, > 200mA (Io)	500 µA @ 60 V	Through Hole	TO-220-2	TO-220AC	-55°C ~ 150°C	ROHS3 Compliant	Obsolete
MBR760-BP	Micro Commercial Co	Schottky	60 V	7.5A	750 mV @ 7.5A	Fast Recovery ≤ 500ns, > 200mA (Io)	500 µA @ 60 V	Through Hole	TO-220-2	TO-220AC	-55°C ~ 150°C	ROHS3 Compliant	Active

Engineering Selection Recommendations

Substitute selection for the obsolete Vishay MBR760/45 is determined by matching specified electrical/performance parameters, package compatibility, and regulatory compliance status. The listed substitute diodes are either active or obsolete, with several options available as ROHS3 compliant for improved environmental compliance relative to the original non-compliant device. When RoHS status is critical, select substitutes with ROHS3 compliance only. All substitutes listed offer matching or higher maximum voltage and current ratings, and specified mounting/package type. Regulatory requirements, inventory availability, and part status must be confirmed using the data provided.

Frequently Asked Questions (FAQ)

Q1: Which parameters must match to ensure compatibility for substituting MBR760/45?
A1: Substitute diodes must match on technology (Schottky), maximum DC reverse voltage, average rectified current, forward voltage at operational current, recovery speed, and mounting/package type.

Q2: Are all substitute parts compliant with RoHS requirements?
A2: Substitutes such as MBR760-E3/45, MBR760-BP, MBR760, and MBR1060G are ROHS3 compliant, while the original MBR760/45 is RoHS non-compliant.

Q3: Is package compatibility ensured among all substitutes?
A3: All substitute parts are supplied in TO-220-2 or TO-220AC through hole packages, matching the mechanical requirements of the MBR760/45.

Q4: Can substitute diodes with higher current ratings be selected?
A4: Yes. Substitutes with higher average rectified current (e.g., 10A vs. 7.5A) are permitted, provided all other specified criteria are strictly met.

Q5: Is there a difference in operating junction temperature range among the substitutes?
A5: Yes. MBR760-E3/45 and MBR1060G offer up to 175°C junction rating, exceeding the original 150°C; others match or slightly vary within the provided range.

Q6: How does the part status (active vs. obsolete) affect selection?
A6: Active substitutes are preferred where product lifecycle continuity is required. Legacy parts with obsolete status may be used only if inventory is sufficient and no active, compliant equivalent exists.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message