MBR6060PTHC0G Equivalent & Substitute Parts

Part Overview

The MBR6060PTHC0G is a Schottky diode array manufactured by Taiwan Semiconductor Corporation, configured as a 1 Pair Common Cathode arrangement with a 60 V DC reverse voltage rating and 60 A average rectified current per diode. This component is packaged in TO-247-3 through-hole format and is classified as an active product with automotive-grade qualification under AEC-Q101 standards.

Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the primary part is unavailable, when alternative packaging formats are preferred, or when design flexibility permits operation within the specified parameter ranges of alternative manufacturers' offerings.

Substiute Parts

MBR6060PTHC0G

Taiwan Semiconductor CorporationIn Stock: 1055MBR6060PTHC0G Datasheet

Current PartRFQ

MBR6060PT

Taiwan Semiconductor CorporationIn Stock: 33897MBR6060PT Datasheet

Parametric EquivalentRFQ

STPS3060CW

STMicroelectronicsIn Stock: 5814STPS3060CW Datasheet

SimilarRFQ

STPS61L60CW

STMicroelectronicsIn Stock: 2192STPS61L60CW Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBR6060PTHC0G is determined by the following critical parameters:

Primary Substitution Criteria:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Mounting Type: Through Hole
• Package / Case: TO-247-3

Secondary Substitution Criteria:

• Current - Average Rectified (Io) (per Diode): Equal or greater capacity
• Operating Temperature Range: Compatibility with application requirements
• RoHS and REACH Compliance: Regulatory alignment

Substitute parts are grouped into two categories:

Parametric Equivalent: Parts that match all primary and secondary criteria with identical electrical specifications and packaging. The MBR6060PT from Taiwan Semiconductor Corporation qualifies as a parametric equivalent, differing only in packaging format (Tube versus standard packaging).

Similar Parts: Parts that match primary substitution criteria but differ in current rating or other secondary parameters. The STPS61L60CW (30 A) and STPS3060CW (15 A) from STMicroelectronics are classified as similar parts due to reduced current ratings relative to the main part's 60 A specification.

Parameter Comparison

Engineering Selection Recommendations

MBR6060PT (Taiwan Semiconductor Corporation)

The MBR6060PT is a parametric equivalent to the MBR6060PTHC0G with identical electrical specifications and TO-247-3 packaging. The primary distinction is the packaging format (Tube). Both parts are ROHS3 compliant and REACH unaffected. Selection of MBR6060PT is appropriate when packaging format flexibility is acceptable and supply chain considerations favor this variant. Both parts maintain the same base product number (MBR6060) and are manufactured by the same supplier.

STPS61L60CW (STMicroelectronics)

The STPS61L60CW is a similar part with a reduced current rating of 30 A per diode, compared to the 60 A specification of the main part. This part maintains the 60 V reverse voltage rating, Schottky technology, fast recovery speed, and TO-247-3 through-hole packaging. The forward voltage at rated current is lower (660 mV @ 30 A versus 930 mV @ 60 A). Selection of STPS61L60CW is appropriate for applications where the current requirement does not exceed 30 A per diode and where the lower forward voltage drop provides design benefits. ROHS3 compliance and REACH unaffected status are maintained.

STPS3060CW (STMicroelectronics)

The STPS3060CW is a similar part with a reduced current rating of 15 A per diode. This part maintains the 60 V reverse voltage rating, Schottky technology, fast recovery speed, and TO-247-3 through-hole packaging. The reverse leakage current is significantly lower (150 µA @ 60 V versus 1 mA @ 60 V). Selection of STPS3060CW is appropriate for applications where the current requirement does not exceed 15 A per diode and where lower reverse leakage characteristics are beneficial. ROHS3 compliance and REACH unaffected status are maintained.

Frequently Asked Questions (FAQ)

Q: Can MBR6060PT be used as a direct replacement for MBR6060PTHC0G?

A: Yes. The MBR6060PT is a parametric equivalent with identical electrical specifications, diode configuration, voltage rating, current rating, and TO-247-3 packaging. The parts differ only in packaging format (Tube). Both are manufactured by Taiwan Semiconductor Corporation and are ROHS3 compliant.

Q: What is the primary difference between MBR6060PTHC0G and STPS61L60CW?

A: The primary difference is the current rating. The MBR6060PTHC0G is rated for 60 A average rectified current per diode, while the STPS61L60CW is rated for 30 A. Both maintain the 60 V reverse voltage rating and TO-247-3 packaging. The STPS61L60CW exhibits lower forward voltage drop (660 mV @ 30 A) compared to the main part (930 mV @ 60 A).

Q: Can STPS3060CW replace MBR6060PTHC0G in all applications?

A: No. The STPS3060CW has a reduced current rating of 15 A per diode, which is insufficient for applications requiring the full 60 A capacity of the MBR6060PTHC0G. Selection of STPS3060CW is limited to applications where current requirements do not exceed 15 A per diode.

Q: Are all substitute parts automotive-grade with AEC-Q101 qualification?

A: The MBR6060PTHC0G is specified as automotive-grade with AEC-Q101 qualification. The MBR6060PT does not specify automotive grade or AEC-Q101 qualification in the provided parameters. The STMicroelectronics parts (STPS61L60CW and STPS3060CW) do not specify automotive grade or AEC-Q101 qualification. Applications requiring automotive-grade components should confirm qualification status with the manufacturer.

Q: Do all parts share the same TO-247-3 package footprint?

A: Yes. All listed parts utilize the TO-247-3 through-hole package format, ensuring mechanical and thermal compatibility in PCB layouts designed for this package type.

Q: What is the moisture sensitivity level for these diode arrays?

A: All parts listed are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are these parts compliant with environmental regulations?

A: All parts are ROHS3 compliant and REACH unaffected, meeting current environmental regulatory requirements for electronic components.