Equivalent & Substitute Parts Reference for MBR50030CT

Part Overview

The MBR50030CT from GeneSiC Semiconductor is a Schottky diode array featuring a 1 pair common cathode configuration, designed for high current rectification applications. It provides a maximum reverse voltage of 30 V and a continuous average forward current of 250A per diode, with fast recovery capability and low forward voltage drop. The MBR50030CT is RoHS compliant and utilizes a Twin Tower chassis mount package. As this product is classified as obsolete, sourcing direct replacements is required to maintain system design integrity and ensure supply continuity.

Substiute Parts

MBR50030CT

GeneSiC SemiconductorIn Stock: 775MBR50030CT Datasheet

Current PartRFQ

MBR60030CT

GeneSiC SemiconductorIn Stock: 5308MBR60030CT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution suitability is determined based on equivalence in the following key electrical and mechanical parameters: diode configuration, technology type, maximum DC reverse voltage, average rectified current, forward voltage drop, switching speed, reverse leakage current, operating temperature range, mounting type, and package format. Only substitute parts matching or exceeding these parameters and compliance status are considered equivalent within the diodes, rectifiers category.

Parameter Comparison

Engineering Selection Recommendations

The MBR50030CT has Obsolete status, necessitating substitution. The MBR60030CT from GeneSiC Semiconductor is Active, RoHS Compliant, and has the same moisture sensitivity level. The MBR60030CT shares all key configuration, electrical, and mechanical categories with the MBR50030CT while offering higher current capability. Selection based solely on the provided status and compliance parameters is supported.

Frequently Asked Questions (FAQ)

Q1: What determines if the MBR60030CT is a suitable substitute for MBR50030CT?
A1: Suitability is determined by matching diode configuration, technology, maximum reverse voltage, forward voltage, speed, reverse leakage, temperature range, mounting type, package, and RoHS status.

Q2: Are there differences in mechanical mounting or package between MBR50030CT and MBR60030CT?
A2: Both parts use the Twin Tower chassis mount package.

Q3: Does substituting the MBR60030CT require changes to board layout or mounting hardware?
A3: No changes are required, as both parts share the same package and mounting configuration based on the parameters provided.

Q4: Is the MBR60030CT certified to the same RoHS and moisture sensitivity level standards?
A4: Both MBR50030CT and MBR60030CT are RoHS Compliant and maintain Moisture Sensitivity Level (MSL) 1 (Unlimited).

Q5: Can the MBR60030CT be used in all applications previously supported by the MBR50030CT?
A5: The MBR60030CT matches or exceeds all specified parameters for direct substitution according to the provided data for diodes, rectifiers in the Twin Tower chassis mount package.