MBR360_R2_00001 Equivalent & Substitute Parts

Part Overview

The MBR360_R2_00001 is a Schottky rectifier diode manufactured by Panjit International Inc., rated for 60 V DC reverse voltage and 3 A average rectified current in a DO-201AD axial through-hole package. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

MBR360_R2_00001

Panjit International Inc.In Stock: 1615MBR360_R2_00001 Datasheet

Current PartRFQ

SB360-T

Diodes IncorporatedIn Stock: 220211SB360-T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBR360_R2_00001 are identified based on strict electrical and mechanical parameter equivalence. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io): 3 A
• Voltage - Forward (Vf) (Max) @ If: 740 mV @ 3 A
• Speed: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Package / Case: DO-201AD, Axial
• Mounting Type: Through Hole
• Operating Temperature - Junction: -65°C ~ 150°C
• RoHS Status: RoHS3 Compliant

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Variations in reverse leakage current within the specified operating conditions do not disqualify substitution eligibility when all other parameters align.

Parameter Comparison

Engineering Selection Recommendations

The SB360-T manufactured by Diodes Incorporated is a direct parametric equivalent to the MBR360_R2_00001. Both components share identical electrical ratings for reverse voltage, average rectified current, forward voltage drop, and recovery speed characteristics. Both are packaged in DO-201AD axial through-hole format and operate across the same temperature range.

Both parts maintain Active product status and comply with RoHS3 and REACH requirements, ensuring regulatory alignment for current and future applications. The SB360-T is available in significantly higher inventory quantities (220,200 pieces) compared to the MBR360_R2_00001 (1,549 pieces), providing supply chain flexibility.

The reverse leakage current specification differs between the two parts (50 µA for MBR360_R2_00001 versus 500 µA for SB360-T at 60 V). This difference remains within acceptable operating parameters for standard rectification applications and does not affect substitution eligibility based on the provided electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can the SB360-T replace the MBR360_R2_00001 in existing designs?

A: Yes. The SB360-T meets all critical electrical and mechanical parameters specified for the MBR360_R2_00001, including voltage rating, current capacity, forward voltage drop, recovery speed, and package format. Direct substitution is supported without circuit modification.

Q: What is the difference in reverse leakage current between these parts?

A: The MBR360_R2_00001 specifies 50 µA reverse leakage at 60 V, while the SB360-T specifies 500 µA at the same conditions. Both values fall within acceptable operating ranges for Schottky rectifier applications and do not disqualify substitution based on the provided specifications.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both the MBR360_R2_00001 and SB360-T operate across the same junction temperature range of -65°C to 150°C, supporting equivalent thermal performance in circuit designs.

Q: Do both parts require the same PCB footprint?

A: Yes. Both components use the DO-201AD axial through-hole package format, requiring identical PCB pad spacing and mounting hole dimensions. No layout modifications are necessary for substitution.

Q: Are there any compliance differences between these parts?

A: No. Both the MBR360_R2_00001 and SB360-T are RoHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity ratings. Regulatory and environmental compliance requirements are equivalent.

Q: Which part should be selected for new designs?

A: Selection between MBR360_R2_00001 and SB360-T depends on supply availability and lead time requirements. Both parts are electrically and mechanically equivalent. The SB360-T offers higher inventory availability, while the MBR360_R2_00001 may be preferred if Panjit International Inc. is an established supplier in your supply chain.