MBR20200CTF-E1 Equivalent & Substitute Parts

Part Overview

The MBR20200CTF-E1 is a Schottky diode array manufactured by Diodes Incorporated, configured as 1 pair common cathode with a maximum reverse voltage of 200 V and average rectified current of 10 A per diode. The device is packaged in a TO-220-3 Full Pack through-hole configuration and operates across a junction temperature range of -65°C to 150°C.

The MBR20200CTF-E1 carries an obsolete product status. Locating equivalent substitute parts ensures design continuity and maintains supply chain reliability for applications requiring this specific diode array configuration and electrical performance.

Substiute Parts

MBR20200CTF-E1

Diodes IncorporatedIn Stock: 1377MBR20200CTF-E1 Datasheet

Current PartRFQ

MBR20200CTF-G1

Diodes IncorporatedIn Stock: 1603MBR20200CTF-G1 Datasheet

DirectRFQ

MBRF20200CTG

onsemiIn Stock: 8780MBRF20200CTG Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBR20200CTF-E1 are qualified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Diode configuration: 1 Pair Common Cathode
• Technology: Schottky
• Maximum reverse voltage: 200 V
• Average rectified current per diode: 10 A
• Forward voltage: 900 mV @ 10 A
• Speed classification: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Operating temperature range: -65°C ~ 150°C
• Mounting type: Through Hole
• Package type: TO-220-3 Full Pack

Substitute parts must maintain identical electrical performance across all specified parameters. Packaging format (tube or full pack) and supplier device package designations may vary while preserving functional equivalence. Reverse leakage current specifications may differ within acceptable operational limits for the application category.

Parameter Comparison

Engineering Selection Recommendations

MBR20200CTF-G1 (Diodes Incorporated)

The MBR20200CTF-G1 is a direct manufacturer equivalent produced by Diodes Incorporated. This substitute maintains identical electrical specifications and mechanical packaging to the obsolete MBR20200CTF-E1. The part carries active product status and is ROHS3 compliant. Reverse leakage current specification matches the original part at 50 µA @ 200 V. REACH status differs (unaffected versus affected), which may be relevant for specific regulatory environments. This substitute provides the most direct replacement path with no electrical or mechanical deviations.

MBRF20200CTG (onsemi)

The MBRF20200CTG is a parametric equivalent manufactured by onsemi under the SWITCHMODE™ series. All critical electrical parameters match the original part: 200 V reverse voltage, 10 A average rectified current, 900 mV forward voltage, and fast recovery speed classification. The device operates across the identical temperature range and uses the same TO-220-3 Full Pack through-hole package. The reverse leakage current specification differs at 1 mA @ 200 V compared to 50 µA @ 200 V on the original part. This substitute carries active product status and ROHS3 compliance. The onsemi part provides functional equivalence with higher reverse leakage characteristics.

Both substitutes are suitable for applications requiring the MBR20200CTF-E1 electrical and mechanical specifications. Selection between them depends on reverse leakage current tolerance requirements and supplier availability.

Frequently Asked Questions (FAQ)

Q: Can the MBR20200CTF-G1 be used as a direct replacement for the MBR20200CTF-E1?

A: Yes. The MBR20200CTF-G1 maintains identical electrical specifications, diode configuration, voltage ratings, current ratings, forward voltage characteristics, and temperature operating range. Both devices use the TO-220-3 Full Pack through-hole package. The primary difference is product status: the original is obsolete while the substitute is active.

Q: What is the difference between the MBR20200CTF-G1 and MBRF20200CTG?

A: Both parts meet the core electrical requirements: 200 V reverse voltage, 10 A average rectified current, 900 mV forward voltage, and fast recovery speed. The key difference is reverse leakage current: the MBR20200CTF-G1 specifies 50 µA @ 200 V while the MBRF20200CTG specifies 1 mA @ 200 V. The MBRF20200CTG is manufactured by onsemi rather than Diodes Incorporated. Both are ROHS3 compliant and active products.

Q: Are the packaging formats interchangeable between these parts?

A: All three parts use the TO-220-3 Full Pack through-hole package configuration. The MBR20200CTF-E1 and MBR20200CTF-G1 are supplied in full pack format, while the MBRF20200CTG is supplied in tube format. The physical package dimensions and pin configuration remain identical across all three parts, ensuring mechanical compatibility in circuit board designs.

Q: Does reverse leakage current affect part selection?

A: Reverse leakage current specification depends on application requirements. The MBR20200CTF-E1 and MBR20200CTF-G1 both specify 50 µA @ 200 V. The MBRF20200CTG specifies 1 mA @ 200 V, which is higher. Applications sensitive to leakage current should use the MBR20200CTF-G1 or original part. Applications with higher leakage tolerance can use the MBRF20200CTG.

Q: Are all substitutes ROHS3 compliant?

A: Yes. The MBR20200CTF-E1, MBR20200CTF-G1, and MBRF20200CTG are all ROHS3 compliant, meeting environmental and hazardous substance restrictions.

Q: What is the difference in REACH status between the substitutes?

A: The MBR20200CTF-E1 carries REACH Affected status while both substitutes (MBR20200CTF-G1 and MBRF20200CTG) carry REACH Unaffected status. This distinction may be relevant for applications subject to REACH regulatory requirements in specific markets.