MBR16100CT-BP Equivalent & Substitute Parts

Part Overview

The MBR16100CT-BP is a Schottky diode array manufactured by Micro Commercial Co, configured as a 1 Pair Common Cathode with a maximum reverse voltage of 100 V and average rectified current of 16 A per diode. The device is packaged in TO-220-3 through-hole configuration and is currently in active product status with 982 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when alternative packaging or compliance certifications are required, or when application-specific performance characteristics necessitate component alternatives within the same functional category.

Substiute Parts

MBR16100CT-BP

Micro Commercial CoIn Stock: 1006MBR16100CT-BP Datasheet

Current PartRFQ

MBR20H100CTG-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1260MBR20H100CTG-E3/45 Datasheet

SimilarRFQ

NTSV30H100CTG

onsemiIn Stock: 2272NTSV30H100CTG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBR16100CT-BP is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Diode Configuration: 1 Pair Common Cathode (mandatory match)
• Technology: Schottky (mandatory match)
• Voltage - DC Reverse (Vr) (Max): 100 V (mandatory match)
• Mounting Type: Through Hole (mandatory match)
• Package / Case: TO-220-3 (mandatory match)

Secondary Substitution Criteria:

• Current - Average Rectified (Io) (per Diode): Equal to or greater than 16 A
• Voltage - Forward (Vf) (Max) @ If: 850 mV or lower
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: Specified at 100 V

Substitute parts must satisfy all primary criteria and maintain electrical performance within the secondary criteria to ensure functional equivalence in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

MBR20H100CTG-E3/45 (Vishay General Semiconductor - Diodes Division): This substitute part maintains all primary substitution criteria with matching diode configuration, Schottky technology, 100 V reverse voltage rating, through-hole mounting, and TO-220-3 package. The current rating of 10 A per diode is lower than the main part's 16 A specification. This part is in active product status and carries ROHS3 compliance certification with MSL 1 rating. The extended operating temperature range (-65 to 175 °C) and lower reverse leakage current (3.5 µA) provide enhanced performance characteristics. This substitute is suitable for applications where the 10 A current rating is sufficient.

NTSV30H100CTG (onsemi): This substitute part satisfies all primary substitution criteria with identical diode configuration, Schottky technology, 100 V reverse voltage, through-hole mounting, and TO-220-3 package. The current rating of 15 A per diode approaches the main part's 16 A specification. However, this part carries an obsolete product status designation, indicating it is no longer in active production. The part maintains ROHS3 compliance and MSL 1 rating. The reverse leakage current (95 µA) is comparable to the main part. Selection of this substitute should account for its obsolete status and potential long-term availability constraints.

Frequently Asked Questions (FAQ)

Q: Can MBR20H100CTG-E3/45 be used as a direct replacement for MBR16100CT-BP?

A: MBR20H100CTG-E3/45 meets all primary substitution criteria including diode configuration, technology, voltage rating, mounting type, and package. However, the current rating is 10 A per diode compared to 16 A for the main part. This substitute is suitable only if the application circuit operates at or below 10 A per diode.

Q: Why is NTSV30H100CTG listed as a substitute if it is obsolete?

A: NTSV30H100CTG satisfies all primary electrical and mechanical substitution criteria with a current rating of 15 A per diode, closely matching the main part's 16 A specification. Obsolete status indicates the part is no longer in active production but may remain available through existing inventory channels. Selection of this part requires verification of long-term availability through the supplier.

Q: Are all substitute parts pin-compatible with MBR16100CT-BP?

A: All listed substitute parts share the TO-220-3 package configuration with identical pin assignments for 1 Pair Common Cathode diode arrays. Physical and electrical pin compatibility is maintained across all substitutes.

Q: What is the significance of reverse leakage current differences between the main part and substitutes?

A: Reverse leakage current is specified at the maximum reverse voltage (100 V). The main part specifies 100 µA, MBR20H100CTG-E3/45 specifies 3.5 µA, and NTSV30H100CTG specifies 95 µA. Lower reverse leakage current indicates reduced parasitic current flow in reverse bias conditions, which may be beneficial in high-impedance or precision applications.

Q: Can the extended temperature range of MBR20H100CTG-E3/45 (-65 to 175 °C) be used in place of the main part's range (-50 to 150 °C)?

A: The extended temperature range of MBR20H100CTG-E3/45 provides broader operational capability. If the application requires operation within the main part's specified range, the extended range of the substitute does not create incompatibility. However, the lower current rating of 10 A remains the limiting factor for this substitute.

Q: What packaging differences exist between the main part and substitutes?

A: The main part MBR16100CT-BP is supplied in bulk packaging. MBR20H100CTG-E3/45 is supplied in tube packaging. NTSV30H100CTG is supplied in tube packaging. All three parts use identical TO-220-3 case configuration. Packaging format does not affect electrical or mechanical compatibility.