Equivalent & Substitute Parts Reference for MBR10U150-TP

Part Overview

The Micro Commercial Co MBR10U150-TP is an active Schottky diode, categorized under diodes and rectifiers. This device is characterized by a 150 V maximum DC reverse voltage and 10A average rectified current, with a fast recovery speed suitable for applications requiring rapid switching and low forward voltage drop. It offers surface-mount installation in a TO-277, 3-PowerDFN package. Establishing alternative models is necessary to maintain design flexibility, ensure supply chain continuity, and address potential product lifecycle changes such as product discontinuation or limited availability.

Substiute Parts

MBR10U150-TP

Micro Commercial CoIn Stock: 1164MBR10U150-TP Datasheet

Current PartRFQ

FSV10150V

onsemiIn Stock: 15346FSV10150V Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute identification is strictly based on matching the following key parameters: semiconductor technology (Schottky), maximum DC reverse voltage (150 V), average rectified current (10A), forward voltage at rated current (840 mV @ 10 A), fast recovery speed, reverse leakage current at test conditions, mounting type (Surface Mount), and mechanical package (TO-277, 3-PowerDFN). Product status, RoHS, and REACH compliance must also align with the original component for regulatory and supply chain integrity.

Parameter Comparison

Engineering Selection Recommendations

Selection of substitute parts is governed by RoHS compliance, REACH status, and product status. Only products with matching environmental certifications and unlimited moisture sensitivity level (MSL 1) are considered equivalent for substitution. It is necessary to confirm product lifecycle status; MBR10U150-TP is active, while FSV10150V is designated "Not For New Designs," indicating limited future availability.

Frequently Asked Questions (FAQ)

Q1: What electrical parameters must match for a diode rectifier substitution?
A1: Technology, maximum DC reverse voltage, average rectified current, forward voltage at rated current, and reverse leakage current at specified voltage must be identical or within provided specifications.

Q2: How critical is package compatibility for this category?
A2: Mechanical compatibility, including mounting type and package/case (TO-277, 3-PowerDFN), is essential for direct replacement on existing PCB layouts.

Q3: What role do compliance statuses play in substitute selection?
A3: RoHS3 and REACH alignment are mandatory for regulatory and environmental requirements in engineered products.

Q4: Can parts with different product statuses be substituted?
A4: Components with different product statuses (active vs. not for new designs) may be substituted if all other parameters match, but future availability and lifecycle support differ.

Q5: Is the reverse leakage current difference between MBR10U150-TP and FSV10150V relevant for substitution?
A5: Substitution is permitted if the value provided is within the allowed key parameters. Both provided parts specify current - reverse leakage at the same test voltage explicitly in the input.