MBR1060H Equivalent & Substitute Parts

Part Overview

The MBR1060H is a Schottky rectifier diode manufactured by onsemi, rated for 60V DC reverse voltage and 10A average rectified current in a TO-220-2 through-hole package. This component is classified as obsolete, necessitating identification of active equivalent parts for new designs and ongoing production requirements. Substitute parts must maintain electrical performance characteristics and mechanical compatibility while offering active product status and current availability.

Substiute Parts

MBR1060H

onsemiIn Stock: 1274MBR1060H Datasheet

Current PartRFQ

MBR1060G

onsemiIn Stock: 4959MBR1060G Datasheet

DirectRFQ

MBR1060-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1996MBR1060-E3/45 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBR1060H are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Primary Matching Criteria:

• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io): 10 A
• Voltage - Forward (Vf) (Max) @ If: 800 mV @ 10 A
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: 100 µA @ 60 V
• Technology: Schottky
• Mounting Type: Through Hole
• Package / Case: TO-220-2 or compatible variant

Secondary Considerations:

• Product Status: Active status preferred for ongoing availability
• RoHS Compliance: ROHS3 Compliant
• Operating Temperature Range: Minimum -65°C to 175°C junction temperature

Parts meeting all primary criteria are classified as direct substitutes. Parts with minor package variant designations (TO-220AC vs TO-220-2) but identical electrical specifications are classified as compatible substitutes with mechanical equivalence.

Parameter Comparison

Engineering Selection Recommendations

MBR1060G (Direct Substitute - Recommended)

The MBR1060G is the primary substitute for the obsolete MBR1060H. Both parts are manufactured by onsemi and share identical electrical specifications across all critical parameters: 60V reverse voltage, 10A average rectified current, 800mV forward voltage drop at 10A, and fast recovery characteristics. The MBR1060G maintains the same TO-220-2 package and operating temperature range (-65°C to 175°C). The MBR1060G holds active product status with higher inventory availability (4913 units), ensuring supply continuity. Both parts are ROHS3 compliant and REACH unaffected. The MBR1060G is supplied in tube packaging, suitable for production environments.

MBR1060-E3/45 (Compatible Substitute - Alternative)

The MBR1060-E3/45 manufactured by Vishay General Semiconductor - Diodes Division provides electrical equivalence to the MBR1060H with one operational constraint. All critical electrical parameters match: 60V reverse voltage, 10A average rectified current, 800mV forward voltage drop at 10A, and fast recovery characteristics. The package designation differs (TO-220AC vs TO-220-2), though both are mechanically compatible through-hole TO-220 variants. The operating temperature range is reduced to -65°C to 150°C, representing a 25°C reduction in maximum junction temperature compared to the MBR1060H. The MBR1060-E3/45 holds active product status with adequate inventory (1980 units) and is ROHS3 compliant and REACH unaffected. This part is suitable for applications where the maximum junction temperature requirement does not exceed 150°C.

Frequently Asked Questions (FAQ)

Q: Can the MBR1060G directly replace the MBR1060H without circuit modifications?

A: Yes. The MBR1060G is a direct substitute with identical electrical specifications and package configuration. No circuit modifications are required. Both parts share the same voltage rating (60V), current rating (10A), forward voltage drop (800mV @ 10A), and fast recovery characteristics (≤500ns). The TO-220-2 package is identical.

Q: What is the difference between MBR1060G and MBR1060-E3/45?

A: Both parts meet the electrical specifications of the MBR1060H with one exception: the MBR1060-E3/45 has a reduced maximum junction temperature of 150°C compared to 175°C for the MBR1060G. The MBR1060-E3/45 uses a TO-220AC package designation instead of TO-220-2, though both are mechanically compatible through-hole variants. The MBR1060G is manufactured by onsemi, while the MBR1060-E3/45 is manufactured by Vishay.

Q: Are there any compliance differences between the substitute parts?

A: All three parts (MBR1060H, MBR1060G, and MBR1060-E3/45) are ROHS3 compliant and REACH unaffected. All share the same ECCN classification (EAR99) and HTSUS code (8541.10.0080). No compliance barriers exist for substitution.

Q: Which substitute part should be selected for new designs?

A: The MBR1060G is the recommended choice for new designs. It maintains full electrical and thermal specifications of the original MBR1060H, offers active product status with superior inventory availability, and is supplied by the original manufacturer (onsemi). The MBR1060-E3/45 is suitable as an alternative only when the reduced maximum junction temperature (150°C) is acceptable for the application.

Q: Is the package difference between TO-220-2 and TO-220AC significant?

A: Both TO-220-2 and TO-220AC are through-hole TO-220 package variants with mechanical compatibility. The designations reflect different supplier package specifications, but the physical dimensions and pin configurations are equivalent for PCB mounting and thermal management purposes.

Q: What is the inventory status for each substitute part?

A: MBR1060H (obsolete): 1170 units. MBR1060G (active): 4913 units. MBR1060-E3/45 (active): 1980 units. The MBR1060G offers the highest availability for production requirements.