MBR1060G Equivalent & Substitute Parts

Part Overview

The MBR1060G is an active Schottky rectifier diode manufactured by onsemi, rated for 60V DC reverse voltage and 10A average rectified current in a through-hole TO-220-2 package. This component is designed for high-speed switching applications requiring fast recovery characteristics. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory constraints require component alternatives that maintain electrical and mechanical compatibility.

Substiute Parts

MBR1060G

onsemiIn Stock: 4959MBR1060G Datasheet

Current PartRFQ

MBR1060-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1996MBR1060-E3/45 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBR1060G is determined by equivalence across the following critical electrical and mechanical parameters:

Voltage rating (60V DC reverse maximum), current capacity (10A average rectified), forward voltage drop (800mV @ 10A), recovery speed classification (fast recovery ≤ 500ns), reverse leakage current (100µA @ 60V), through-hole mounting configuration, and TO-220-2 package footprint. All substitute parts must maintain these specifications to ensure functional compatibility within the original circuit design. RoHS3 compliance and REACH unaffected status are required for regulatory alignment.

Parameter Comparison

Engineering Selection Recommendations

Both the MBR1060G and MBR1060-E3/45 are active products with identical electrical specifications for voltage, current, forward voltage drop, recovery speed, and reverse leakage characteristics. Both components are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

The MBR1060G operates across a junction temperature range of -65°C to 175°C, while the MBR1060-E3/45 operates from -65°C to 150°C. Selection between these parts depends on the maximum junction temperature requirement of the application. For applications requiring operation above 150°C, the MBR1060G is the appropriate choice. For applications with maximum junction temperatures at or below 150°C, either part is suitable.

Both components share identical electrical performance and package footprint, ensuring direct mechanical and electrical interchangeability within the specified temperature operating range of the substitute part.

Frequently Asked Questions (FAQ)

Q: Can the MBR1060-E3/45 be used as a direct replacement for the MBR1060G?

A: The MBR1060-E3/45 is electrically equivalent to the MBR1060G across all critical parameters including voltage rating, current capacity, forward voltage drop, and recovery speed. Both components use the TO-220-2 package footprint and are mechanically compatible. The primary difference is the maximum junction temperature rating: MBR1060-E3/45 is rated to 150°C while MBR1060G is rated to 175°C. Direct substitution is valid for applications where the maximum junction temperature does not exceed 150°C.

Q: What are the key electrical parameters that define substitution compatibility?

A: Substitution compatibility is determined by: 60V DC reverse voltage rating, 10A average rectified current capacity, 800mV maximum forward voltage drop at 10A, fast recovery speed classification (≤500ns), 100µA reverse leakage current at 60V, and Schottky technology. All substitute parts must match these specifications exactly.

Q: Are there package compatibility considerations between MBR1060G and MBR1060-E3/45?

A: Both parts use the TO-220-2 package designation and are through-hole mounted components. The physical footprint and pin configuration are compatible, allowing direct board-level substitution without layout modifications.

Q: What compliance certifications apply to both parts?

A: Both the MBR1060G and MBR1060-E3/45 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards for electronic component distribution and use.

Q: How does the operating temperature range affect part selection?

A: The MBR1060G supports junction temperatures from -65°C to 175°C, while the MBR1060-E3/45 supports -65°C to 150°C. Applications requiring sustained operation above 150°C junction temperature must use the MBR1060G. Applications with maximum junction temperatures at or below 150°C can use either part.