MBR10150HC0G Equivalent & Substitute Parts

Part Overview

The MBR10150HC0G is a general-purpose rectifier diode rated for 150 V DC reverse voltage and 10 A average rectified current, housed in a TO-220AC through-hole package. Manufactured by Taiwan Semiconductor Corporation, this component is classified as a Standard technology diode with automotive-grade qualification (AEC-Q101). The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain electrical and mechanical compatibility for existing designs.

Substiute Parts

MBR10150HC0G

Taiwan Semiconductor CorporationIn Stock: 745MBR10150HC0G Datasheet

Current PartRFQ

MBR10150H

Taiwan Semiconductor CorporationIn Stock: 1012MBR10150H Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBR10150HC0G is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 150 V
• Current - Average Rectified (Io): 10 A
• Voltage - Forward (Vf) (Max) @ If: 1.05 V @ 10 A
• Current - Reverse Leakage @ Vr: 100 µA @ 150 V
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Parameters:

• Package / Case: TO-220-2
• Mounting Type: Through Hole
• Operating Temperature - Junction: -55°C ~ 150°C

Compliance Parameters:

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant

Substitute parts must match all electrical specifications, maintain identical package and mounting characteristics, and retain automotive-grade qualification to ensure direct replacement capability in existing circuit designs.

Parameter Comparison

Engineering Selection Recommendations

The MBR10150H serves as a direct electrical and mechanical substitute for the discontinued MBR10150HC0G. Both components are manufactured by Taiwan Semiconductor Corporation and maintain identical electrical specifications across all critical parameters: 150 V reverse voltage rating, 10 A average rectified current, 1.05 V forward voltage drop at 10 A, and fast recovery characteristics.

Both parts are qualified to AEC-Q101 automotive standards and housed in TO-220-2 through-hole packages, ensuring compatibility with existing PCB layouts and thermal management designs. Both maintain ROHS3 compliance and operate across the identical temperature range of -55°C to 150°C.

The primary distinction is technology classification: the MBR10150HC0G uses Standard diode technology, while the MBR10150H employs Schottky technology. Despite this classification difference, the electrical performance parameters are identical, and the MBR10150H is currently in active production status, making it the appropriate selection for applications requiring the MBR10150HC0G.

Frequently Asked Questions (FAQ)

Q: Can the MBR10150H directly replace the MBR10150HC0G in existing designs?

A: Yes. Both components share identical electrical specifications (150 V reverse voltage, 10 A current rating, 1.05 V forward voltage), identical package geometry (TO-220-2), and identical thermal operating range (-55°C to 150°C). Direct PCB substitution is supported.

Q: What is the difference between Standard and Schottky technology in these parts?

A: The MBR10150HC0G uses Standard diode technology, while the MBR10150H uses Schottky technology. However, both deliver identical electrical performance as specified in the parameter tables. The technology classification does not affect substitution compatibility.

Q: Are both parts automotive-qualified?

A: Yes. Both the MBR10150HC0G and MBR10150H carry AEC-Q101 automotive qualification and automotive-grade classification, meeting automotive reliability and quality standards.

Q: Is the TO-220AC package identical to TO-220-2?

A: The supplier device package designation is TO-220AC for both parts, and the package/case classification is TO-220-2 for both. These designations refer to the same physical package configuration used in this product line.

Q: Are there any compliance or environmental differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity level (MSL) ratings of 1 (Unlimited). Environmental and regulatory compliance is equivalent.

Q: Why is the MBR10150HC0G discontinued?

A: The MBR10150HC0G is discontinued at DiGi Electronics. The MBR10150H remains in active production and provides equivalent functionality for all applications requiring the original part.