MBR10150CTF-E1 Equivalent & Substitute Parts

Part Overview

The MBR10150CTF-E1 is a Schottky diode array manufactured by Diodes Incorporated, configured as 1 pair common cathode with a 150 V DC reverse voltage rating and 5 A average rectified current per diode. The device is packaged in a TO-220-3 Full Pack through-hole format and features fast recovery characteristics with a maximum forward voltage of 920 mV at 5 A.

The MBR10150CTF-E1 carries an obsolete product status. Locating equivalent substitute parts is necessary to maintain design continuity and ensure component availability for new production runs and field replacements.

Substiute Parts

MBR10150CTF-E1

Diodes IncorporatedIn Stock: 15263MBR10150CTF-E1 Datasheet

Current PartRFQ

MBR10150CTF-G1

Diodes IncorporatedIn Stock: 10499MBR10150CTF-G1 Datasheet

DirectRFQ

STPS10150CFP

STMicroelectronicsIn Stock: 4765STPS10150CFP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MBR10150CTF-E1 are qualified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Mandatory Matching Parameters:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 150 V
• Current - Average Rectified (Io) (per Diode): 5 A
• Voltage - Forward (Vf) (Max) @ If: 920 mV @ 5 A
• Speed: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Operating Temperature - Junction (Max): 175°C
• Mounting Type: Through Hole
• Package / Case: TO-220-3 Full Pack
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All substitute parts listed meet these electrical and mechanical requirements and are therefore electrically and mechanically interchangeable with the MBR10150CTF-E1 in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

MBR10150CTF-G1 (Diodes Incorporated)

The MBR10150CTF-G1 is a direct manufacturer equivalent produced by Diodes Incorporated. This substitute maintains identical electrical specifications and mechanical form factor to the MBR10150CTF-E1. The primary distinction is product status: MBR10150CTF-G1 is active and currently in production, whereas MBR10150CTF-E1 is obsolete. The MBR10150CTF-G1 carries ROHS3 compliance and is supplied in tube packaging. This part is the preferred substitute when maintaining the same manufacturer source is a design requirement.

STPS10150CFP (STMicroelectronics)

The STPS10150CFP is a parametric equivalent manufactured by STMicroelectronics. All critical electrical parameters match the MBR10150CTF-E1, including reverse voltage, forward voltage, current rating, and operating temperature. The STPS10150CFP exhibits superior reverse leakage characteristics at 2 µA compared to 100 µA in the main part, representing improved leakage performance. The device is active in production, ROHS3 compliant, and supplied in tube packaging. The supplier device package designation differs (TO-220FP versus TO-220F-3), though both conform to the TO-220-3 Full Pack mechanical specification. This part is suitable for applications where cross-manufacturer substitution is acceptable.

Frequently Asked Questions (FAQ)

Q: Can MBR10150CTF-G1 be used as a direct replacement for MBR10150CTF-E1?

A: Yes. The MBR10150CTF-G1 is electrically and mechanically identical to the MBR10150CTF-E1. Both devices share the same base product number (MBR10150), diode configuration, voltage rating, current rating, forward voltage characteristics, and package format. The primary difference is product status: MBR10150CTF-G1 is active while MBR10150CTF-E1 is obsolete.

Q: What is the difference between MBR10150CTF-E1 and STPS10150CFP?

A: Both parts are electrically equivalent in all critical parameters: 150 V reverse voltage, 5 A current rating, 920 mV forward voltage at 5 A, and fast recovery characteristics. The STPS10150CFP is manufactured by STMicroelectronics rather than Diodes Incorporated. A notable difference is reverse leakage current: STPS10150CFP exhibits 2 µA at 150 V compared to 100 µA in the MBR10150CTF-E1, indicating lower leakage performance in the STMicroelectronics device. Both are ROHS3 compliant and feature identical thermal ratings.

Q: Are there packaging differences between the substitute parts?

A: The MBR10150CTF-E1 and MBR10150CTF-G1 both use the TO-220F-3 supplier device package designation. The STPS10150CFP uses the TO-220FP designation. All three parts conform to the TO-220-3 Full Pack mechanical specification and are through-hole mounted devices. The packaging designation difference does not affect mechanical or electrical compatibility in circuit applications.

Q: Can STPS10150CFP replace MBR10150CTF-E1 in all applications?

A: The STPS10150CFP meets all electrical and mechanical substitution criteria for the MBR10150CTF-E1. The lower reverse leakage current in the STPS10150CFP (2 µA versus 100 µA) represents improved performance characteristics. Cross-manufacturer substitution is valid when design specifications do not mandate a specific manufacturer source.

Q: What is the significance of the product status difference?

A: The MBR10150CTF-E1 carries obsolete status, indicating it is no longer manufactured or supported by Diodes Incorporated. Both MBR10150CTF-G1 and STPS10150CFP are active products in current production. For new designs and ongoing production requirements, active substitute parts ensure long-term component availability and manufacturer support.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. The MBR10150CTF-E1, MBR10150CTF-G1, and STPS10150CFP are all ROHS3 compliant. All three devices carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.