MBR10150 C0G Equivalent & Substitute Parts

Part Overview

The MBR10150 C0G is a general-purpose rectifier diode rated for 150 V DC reverse voltage and 10 A average rectified current in a through-hole TO-220AC package. This part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement.

Key Parameters

Parameter	Value
Voltage - DC Reverse (Vr) (Max)	150 V
Current - Average Rectified (Io)	10 A
Voltage - Forward (Vf) (Max) @ If	1.05 V @ 10 A
Current - Reverse Leakage @ Vr	100 µA @ 150 V
Operating Temperature - Junction	-55°C ~ 150°C
Mounting Type	Through Hole
Package / Case	TO-220-2
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the MBR10150 C0G is determined by equivalence across the following critical parameters:

Voltage Rating: DC reverse voltage must equal or exceed 150 V
Current Rating: Average rectified current must equal or exceed 10 A
Forward Voltage Drop: Maximum forward voltage at rated current must not exceed 1.05 V @ 10 A
Reverse Leakage: Maximum reverse leakage current must not exceed 100 µA @ 150 V
Package Compatibility: Through-hole TO-220-2 package required for mechanical and thermal interface compatibility
Temperature Range: Operating junction temperature range must encompass -55°C ~ 150°C
Compliance: RoHS3 compliance required

The MBR10150 (without C0G designation) meets all substitution criteria and is available as an active product from Taiwan Semiconductor Corporation.

Parameter Comparison

Parameter	MBR10150 C0G (Main Part)	MBR10150 (Substitute)
Manufacturer	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation
Category	Diodes, Rectifiers	Diodes, Rectifiers
Voltage - DC Reverse (Vr) (Max)	150 V	150 V
Current - Average Rectified (Io)	10 A	10 A
Voltage - Forward (Vf) (Max) @ If	1.05 V @ 10 A	1.05 V @ 10 A
Current - Reverse Leakage @ Vr	100 µA @ 150 V	100 µA @ 150 V
Operating Temperature - Junction	-55°C ~ 150°C	-55°C ~ 150°C
Mounting Type	Through Hole	Through Hole
Package / Case	TO-220-2	TO-220-2
Supplier Device Package	TO-220AC	TO-220AC
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected
Product Status	Discontinued at DiGi Electronics	Active

Engineering Selection Recommendations

The MBR10150 is the direct substitute for the discontinued MBR10150 C0G. Both parts are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications across all critical parameters: 150 V reverse voltage rating, 10 A average rectified current, 1.05 V forward voltage drop at rated current, and 100 µA reverse leakage current.

The substitute part maintains full compliance with ROHS3 and REACH requirements. The primary distinction is product status: the MBR10150 is actively manufactured and stocked (40,100 pcs available), whereas the MBR10150 C0G is discontinued. Both parts utilize the same TO-220-2 package and support the identical operating temperature range of -55°C to 150°C.

Selection of the MBR10150 as a replacement ensures electrical and mechanical compatibility with existing designs while providing access to current inventory and ongoing manufacturer support.

Frequently Asked Questions (FAQ)

Q: Can the MBR10150 directly replace the MBR10150 C0G in existing designs?

A: Yes. Both parts share identical electrical specifications, package configuration, and compliance certifications. Direct substitution is supported without design modification.

Q: What is the difference between the MBR10150 C0G and MBR10150?

A: The primary difference is product status. The MBR10150 C0G is discontinued at DiGi Electronics, while the MBR10150 is an active product. Electrical parameters, package type, and compliance ratings are identical.

Q: Are there any thermal or mechanical considerations when substituting these parts?

A: No. Both parts use the TO-220-2 package with identical thermal and mechanical interfaces. Mounting and thermal management requirements remain unchanged.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the MBR10150 C0G and MBR10150 are ROHS3 compliant and REACH unaffected.

Q: What is the availability difference between these parts?

A: The MBR10150 C0G has 781 pcs in stock but is discontinued. The MBR10150 has 40,100 pcs in stock and is actively manufactured, providing superior long-term availability.

Q: Are the forward voltage characteristics identical?

A: Yes. Both parts specify a maximum forward voltage of 1.05 V at 10 A, ensuring equivalent circuit performance.

Q: Can the MBR10150 be used in applications requiring the full -55°C to 150°C operating range?

A: Yes. The MBR10150 supports the complete operating temperature range specified for the MBR10150 C0G.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message