MBB0207CC4530FC100 Equivalent & Substitute Parts

Part Overview

The MBB0207CC4530FC100 is a 453 Ohms ±1% 0.6W through hole resistor with axial metal film construction, manufactured by Vishay Beyschlag/Draloric/BC Components. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and inventory optimization.

Substiute Parts

MBB0207CC4530FC100

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1152MBB0207CC4530FC100 Datasheet

Current PartRFQ

MRS25000C4530FCT00

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 4050MRS25000C4530FCT00 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by matching the following critical parameters:

• Resistance value: 453 Ohms
• Tolerance: ±1%
• Power rating: 0.6W
• Composition: Metal Film
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Package type: Axial
• Physical dimensions: 0.098" Dia x 0.256" L (2.50mm x 6.50mm)
• Number of terminations: 2

The MRS25000C4530FCT00 meets all electrical and mechanical parameters. The only difference is packaging format: the main part uses Tape & Box (TB) packaging, while the substitute uses Cut Tape (CT) packaging. Both are supplied by the same manufacturer and maintain identical component specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the MBB0207CC4530FC100 and MRS25000C4530FCT00 are Active products from the same manufacturer with identical electrical performance and physical specifications. Selection between these parts is determined by packaging requirements:

• MBB0207CC4530FC100: Select when Tape & Box packaging is required for inventory management or assembly processes.
• MRS25000C4530FCT00: Select when Cut Tape packaging is acceptable or preferred for automated pick-and-place assembly operations.

Both parts maintain ROHS3 compliance and are suitable for applications requiring 453 Ohm resistors with 0.6W power dissipation across the -55°C to 155°C operating range.

Frequently Asked Questions (FAQ)

Q: Can MRS25000C4530FCT00 be used as a direct replacement for MBB0207CC4530FC100?

A: Yes. Both parts have identical electrical specifications (453 Ohms ±1%, 0.6W, metal film construction) and physical dimensions. The difference is packaging format only. Substitution is valid for any application where the component specifications match the circuit requirements.

Q: What is the difference between Tape & Box and Cut Tape packaging?

A: Tape & Box (TB) packaging includes a full reel of components on tape with a protective box. Cut Tape (CT) packaging provides components on tape segments without the full reel. Both formats contain the same component; packaging choice depends on assembly process requirements and inventory handling procedures.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified under the same ECCN and HTSUS codes. Compliance status is identical.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes, provided the assembly process can accommodate the packaging format. The physical component dimensions and electrical characteristics are identical, making them functionally interchangeable in circuit applications.

Q: What determines if a substitute part is acceptable?

A: Substitution is valid when all electrical parameters (resistance, tolerance, power rating, temperature coefficient, operating temperature range) and mechanical parameters (package type, physical dimensions, termination count) match the original specification.