MBASU063SCG6R7DFNA01 Equivalent & Substitute Parts

Part Overview

The MBASU063SCG6R7DFNA01 is a 6.7 pF ceramic capacitor manufactured by Taiyo Yuden, rated for 50V operation with C0G/NP0 temperature coefficient characteristics. This surface-mount multilayer ceramic capacitor (MLCC) is packaged in 0201 (0603 Metric) form factor and is designated for general-purpose applications.

The part maintains Active product status with 1052 units currently in stock. Identifying equivalent and substitute parts is necessary for supply chain continuity, design flexibility, and long-term component availability management.

Substiute Parts

MBASU063SCG6R7DFNA01

Taiyo YudenIn Stock: 1148MBASU063SCG6R7DFNA01 Datasheet

Current PartRFQ

UMK063CG6R7DTHF

Taiyo YudenIn Stock: 2158UMK063CG6R7DTHF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MBASU063SCG6R7DFNA01 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 6.7 pF
• Tolerance: ±0.5pF
• Voltage rating: 50V (minimum)
• Temperature coefficient: C0G/NP0

Mechanical Parameters:

• Package type: 0201 (0603 Metric)
• Mounting type: Surface Mount, MLCC
• Physical dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm)
• Maximum thickness: 0.013" (0.33mm)

Environmental & Compliance Parameters:

• Operating temperature range: -55°C ~ 125°C
• Moisture sensitivity level: 1 (Unlimited)
• RoHS3 compliance

The substitute part UMK063CG6R7DTHF meets all electrical, mechanical, and environmental specifications required for direct substitution. Differences in product status and application classification do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: MBASU063SCG6R7DFNA01

The MBASU063SCG6R7DFNA01 is the recommended choice for new designs. This part maintains Active product status, ensuring long-term availability and continued manufacturer support. It is designated for general-purpose applications and carries ROHS3 compliance with unlimited moisture sensitivity rating.

Substitute Selection: UMK063CG6R7DTHF

The UMK063CG6R7DTHF is a functionally equivalent substitute that meets all electrical, mechanical, and environmental specifications. However, this part carries "Not For New Designs" status, indicating it is intended for legacy or existing design support only. The UMK063CG6R7DTHF includes AEC-Q200 automotive qualification, making it suitable for applications requiring automotive-grade reliability. This part should be selected only when the primary part is unavailable or when automotive qualification is a specific requirement.

Both parts are manufactured by Taiyo Yuden and are fully interchangeable from an electrical and mechanical standpoint.

Frequently Asked Questions (FAQ)

Q: Can UMK063CG6R7DTHF be used as a direct replacement for MBASU063SCG6R7DFNA01?

A: Yes. Both parts are electrically and mechanically identical. They share the same capacitance (6.7 pF), tolerance (±0.5pF), voltage rating (50V), temperature coefficient (C0G/NP0), package type (0201), and physical dimensions. The primary difference is product status and application classification.

Q: What is the significance of the "Not For New Designs" status on the UMK063CG6R7DTHF?

A: This designation indicates the part is in mature or declining production phase. While fully functional and available, it is intended for sustaining existing designs rather than new product development. New designs should prioritize the MBASU063SCG6R7DFNA01, which maintains Active status.

Q: Are there any thermal or electrical performance differences between these parts?

A: No. Both parts operate across the identical temperature range (-55°C ~ 125°C) and maintain the same C0G/NP0 temperature coefficient characteristics. Electrical performance is equivalent.

Q: Does the automotive qualification (AEC-Q200) of the UMK063CG6R7DTHF affect its use in non-automotive applications?

A: No. AEC-Q200 qualification represents an additional quality and reliability standard. A part qualified to automotive standards can be used in general-purpose applications without restriction.

Q: Are the packaging and handling requirements identical?

A: Yes. Both parts share Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling precautions are required. Both are supplied in Tape & Reel (TR) packaging and are suitable for automated assembly processes.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. The identical 0201 (0603 Metric) package and physical dimensions (0.024" L x 0.012" W, 0.013" max thickness) ensure mechanical and electrical compatibility with existing PCB layouts and assembly processes.