MBASH105SB7152MFCA01 Equivalent & Substitute Parts

Part Overview

The MBASH105SB7152MFCA01 is a 1500 pF ceramic capacitor manufactured by Taiyo Yuden, rated for 100V operation with X7R temperature coefficient characteristics. This surface mount multilayer ceramic capacitor (MLCC) in 0402 (1005 Metric) package format is designed for general purpose applications requiring stable capacitance across a wide temperature range of -55°C to 125°C.

The main part is currently in Active product status with 766 pieces available in stock. Identifying equivalent and substitute parts is necessary when inventory becomes limited, when design revisions require alternative sourcing options, or when supply chain considerations necessitate qualified alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

MBASH105SB7152MFCA01

Taiyo YudenIn Stock: 837MBASH105SB7152MFCA01 Datasheet

Current PartRFQ

HMK105B7152MV-F

Taiyo YudenIn Stock: 1118HMK105B7152MV-F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBASH105SB7152MFCA01 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 1500 pF
• Capacitance tolerance: ±20%
• Voltage rating: 100V minimum
• Temperature coefficient: X7R

Mechanical Parameters:

• Package format: 0402 (1005 Metric)
• Mounting type: Surface Mount, MLCC
• Physical dimensions: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Maximum thickness: 0.022" (0.55mm)

Compliance Parameters:

• RoHS3 compliance
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all these parameters are classified as direct parametric equivalents and may be substituted without circuit redesign or board layout modification.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: MBASH105SB7152MFCA01

The MBASH105SB7152MFCA01 is the recommended choice for new designs and ongoing production. This part maintains Active product status from Taiyo Yuden, ensuring long-term availability and continued manufacturer support. It carries full ROHS3 compliance and MSL 1 rating, meeting current environmental and reliability standards.

Alternative Selection: HMK105B7152MV-F

The HMK105B7152MV-F is a parametric equivalent that meets all electrical and mechanical specifications. However, this part carries a "Not For New Designs" product status designation. This substitute is suitable for legacy system maintenance, field replacements, or situations where existing inventory must be utilized. The higher current inventory level (1036 pieces) may provide supply chain advantages for immediate fulfillment requirements.

Both parts are manufactured by Taiyo Yuden and share identical electrical characteristics, package format, and compliance certifications. Selection between these two options should be based on product lifecycle requirements and supply chain constraints rather than technical performance differences.

Frequently Asked Questions (FAQ)

Q: Can HMK105B7152MV-F be used as a direct replacement for MBASH105SB7152MFCA01 in existing designs?

A: Yes. Both parts are parametric equivalents with identical capacitance (1500 pF), tolerance (±20%), voltage rating (100V), temperature coefficient (X7R), operating temperature range (-55°C to 125°C), and package format (0402/1005 Metric). No circuit redesign or board layout modification is required for substitution.

Q: What is the significance of the "Not For New Designs" status on HMK105B7152MV-F?

A: This designation indicates that Taiyo Yuden is not recommending this part for new product development. However, the part remains functionally equivalent and suitable for replacement in existing systems or legacy applications. New designs should prioritize MBASH105SB7152MFCA01, which maintains Active status.

Q: Are there any physical differences between these parts that would affect PCB assembly?

A: No. Both parts share identical physical dimensions (0.039" L x 0.020" W / 1.00mm x 0.50mm) and maximum thickness (0.022" / 0.55mm). They are both surface mount MLCCs in 0402 (1005 Metric) package format and are compatible with standard pick-and-place assembly equipment and reflow soldering processes.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both MBASH105SB7152MFCA01 and HMK105B7152MV-F are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited). They meet identical environmental and regulatory standards.

Q: What is the difference in application focus between these parts?

A: MBASH105SB7152MFCA01 is designated for general purpose applications, while HMK105B7152MV-F is specified for SMPS (Switched Mode Power Supply) filtering. Despite this application designation difference, both parts meet identical electrical specifications and are functionally interchangeable.

Q: Can I mix these parts in the same production batch?

A: From an electrical and mechanical standpoint, yes. Both parts are parametric equivalents. However, manufacturing and quality documentation practices may require separate tracking due to different manufacturer part numbers and product status designations. Consult your quality assurance procedures for specific requirements.