Equivalent & Substitute Parts for MBA02040C7322FRP00

Part Overview

The MBA02040C7322FRP00 is a 73.2 kOhms ±1% metal film axial resistor rated at 0.4W, designed for through-hole applications in automotive environments. This component is manufactured by Vishay Beyschlag/Draloric/BC Components and complies with AEC-Q200 automotive qualification standards. The part is currently active in production with 691 pieces available in stock. Substitute parts may be required due to inventory constraints, packaging format preferences, or application-specific power rating requirements.

Substiute Parts

MBA02040C7322FRP00

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 754MBA02040C7322FRP00 Datasheet

Current PartRFQ

SFR16S0007322FR500

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 6477SFR16S0007322FR500 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBA02040C7322FRP00 is determined by the following critical parameters:

• Resistance value: 73.2 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Composition: Metal Film (exact match required)
• Package: Axial through-hole (exact match required)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)
• RoHS compliance: ROHS3 (minimum requirement)

The substitute part SFR16S0007322FR500 meets all mandatory substitution criteria. While the power rating differs (0.5W versus 0.4W), the higher rating provides equivalent or superior performance in the same physical package category. Temperature coefficient variation (±100ppm/°C versus ±50ppm/°C) represents a relaxation of the original specification but remains within acceptable industrial tolerances for metal film resistors.

Parameter Comparison

Engineering Selection Recommendations

Both the MBA02040C7322FRP00 and SFR16S0007322FR500 are active production components manufactured by Vishay Beyschlag/Draloric/BC Components with ROHS3 compliance and identical operating temperature ranges. The SFR16S0007322FR500 provides higher power dissipation capacity (0.5W) within the same axial package footprint, making it suitable for applications where the original 0.4W specification can accommodate the increased rating. Both parts maintain the required 73.2 kOhms resistance value and ±1% tolerance specification. Selection between these parts should be based on packaging format availability (Tape & Reel versus Cut Tape) and specific circuit power dissipation requirements.

Frequently Asked Questions (FAQ)

Q: Can SFR16S0007322FR500 be used as a direct replacement for MBA02040C7322FRP00?

A: Yes, provided the circuit design accommodates the higher power rating (0.5W versus 0.4W). Both parts share identical resistance, tolerance, composition, and operating temperature specifications.

Q: What is the significance of the different temperature coefficients?

A: The MBA02040C7322FRP00 specifies ±50ppm/°C while the SFR16S0007322FR500 specifies ±100ppm/°C. This represents a relaxation of temperature stability. For precision analog circuits requiring tight temperature coefficient performance, the original part is preferred. For general-purpose applications, the substitute is acceptable.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel (TR) and Cut Tape (CT) packaging formats are logistics and assembly considerations only. Electrical characteristics remain identical between the two formats.

Q: Are both parts automotive-qualified?

A: The MBA02040C7322FRP00 carries explicit AEC-Q200 automotive qualification. The SFR16S0007322FR500 does not list automotive qualification in the provided specifications. For applications requiring AEC-Q200 compliance, the original part is required.

Q: What is the physical size difference between these parts?

A: MBA02040C7322FRP00: 0.063" Dia x 0.142" L (1.60mm x 3.60mm). SFR16S0007322FR500: 0.075" Dia x 0.138" L (1.90mm x 4.60mm). Both are axial through-hole packages with minor dimensional variations that do not affect standard PCB footprint compatibility.