MBA02040C6980FRP00 Equivalent & Substitute Parts

Part Overview

The MBA02040C6980FRP00 is a 698 Ohm ±1% metal film axial resistor rated at 0.4W, designed for through-hole applications with automotive-grade reliability (AEC-Q200). This component is actively manufactured and stocked, with ROHS3 compliance and REACH unaffected status. Substitute parts may be required due to packaging format availability, inventory constraints, or application-specific thermal requirements.

Substiute Parts

MBA02040C6980FRP00

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1082MBA02040C6980FRP00 Datasheet

Current PartRFQ

SFR16S0006980FR500

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 5927SFR16S0006980FR500 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The SFR16S0006980FR500 qualifies as a direct substitute based on the following allowed parameters:

• Identical resistance value: 698 Ohms
• Identical tolerance: ±1%
• Identical composition: Metal Film
• Identical package type: Axial
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS and REACH compliance status
• Higher power rating (0.5W vs. 0.4W) provides thermal margin
• Different packaging format (Cut Tape vs. Tape & Reel) accommodates supply chain flexibility

Parameter Comparison

Engineering Selection Recommendations

The SFR16S0006980FR500 is a valid substitute for the MBA02040C6980FRP00 in applications where the following conditions are met:

• Circuit design accommodates the higher power rating (0.5W vs. 0.4W)
• Physical dimensions are compatible with board layout (slight differences in diameter and length exist)
• Cut Tape packaging format is acceptable for assembly processes
• Temperature coefficient tolerance of ±100ppm/°C is acceptable (vs. ±50ppm/°C for the primary part)

Both components maintain identical electrical performance for the 698 Ohm resistance value and ±1% tolerance specification. Both are actively manufactured, ROHS3 compliant, and suitable for automotive applications requiring AEC-Q200 qualification.

Frequently Asked Questions (FAQ)

Q: Can SFR16S0006980FR500 replace MBA02040C6980FRP00 in all applications?

A: The SFR16S0006980FR500 is electrically equivalent for the 698 Ohm ±1% specification. Verify that the higher power rating (0.5W) and different temperature coefficient (±100ppm/°C) are acceptable for your circuit design. Physical dimensions differ slightly; confirm PCB layout compatibility.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous reels for automated assembly lines. Cut Tape (CT) packaging is pre-cut into smaller quantities for manual or semi-automated assembly. Both contain identical components; packaging format selection depends on assembly process requirements.

Q: Are both parts automotive-grade?

A: The MBA02040C6980FRP00 carries explicit AEC-Q200 automotive qualification. The SFR16S0006980FR500 does not list automotive features in the provided specifications. Verify AEC-Q200 compliance with the manufacturer if automotive qualification is required.

Q: What is the significance of temperature coefficient differences?

A: The MBA02040C6980FRP00 has a temperature coefficient of ±50ppm/°C, while the SFR16S0006980FR500 has ±100ppm/°C. This means the substitute part's resistance will drift more with temperature changes. For precision circuits, confirm that the higher drift is acceptable.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the MBA02040C6980FRP00 and SFR16S0006980FR500 are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for EU and global markets.