MBA02040C4530FRP00 Equivalent & Substitute Parts

Part Overview

The MBA02040C4530FRP00 is a 453 Ohm ±1% 0.4W through-hole axial resistor manufactured by Vishay Beyschlag/Draloric/BC Components. This metal film resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The component is currently in active production status with 859 pieces available in tape and reel packaging. Substitute parts are identified when packaging format changes or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

MBA02040C4530FRP00

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 898MBA02040C4530FRP00 Datasheet

Current PartRFQ

MBA02040C4530FC100

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1969MBA02040C4530FC100 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBA02040C4530FRP00 is determined by strict equivalence across the following critical parameters:

• Resistance value: 453 Ohms
• Tolerance: ±1%
• Power rating: 0.4W
• Composition: Metal Film
• Package case: Axial
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Physical dimensions: 0.063" Dia x 0.142" L (1.60mm x 3.60mm)
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant

The identified substitute part differs only in supplier packaging format (Cut Tape versus Tape & Reel), with all electrical and mechanical characteristics remaining identical. This substitution is valid for applications where packaging format does not impose process constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the MBA02040C4530FRP00 and MBA02040C4530FC100 are active production components from the same manufacturer with identical electrical specifications and automotive AEC-Q200 qualification. Selection between these parts should be based on packaging requirements and inventory availability. The main part is supplied in Tape & Reel format suitable for automated assembly processes, while the substitute is supplied in Cut Tape format. Both components maintain ROHS3 compliance and are suitable for automotive applications operating across the -55°C to 155°C temperature range. The substitute part offers higher current inventory availability at 1957 pieces compared to 859 pieces for the main part.

Frequently Asked Questions (FAQ)

Q: Can MBA02040C4530FC100 be used as a direct replacement for MBA02040C4530FRP00?

A: Yes, the MBA02040C4530FC100 is electrically and mechanically equivalent. The only difference is the packaging format: Cut Tape (CT) versus Tape & Reel (TR). Selection depends on your assembly process requirements and whether your equipment can accommodate cut tape packaging.

Q: Are there any performance differences between these two parts?

A: No. Both parts have identical resistance value (453 Ohms), tolerance (±1%), power rating (0.4W), temperature coefficient (±50ppm/°C), and operating temperature range (-55°C to 155°C). They are manufactured from the same metal film composition and meet the same AEC-Q200 automotive qualification standard.

Q: What does the packaging format difference mean for my application?

A: Tape & Reel (TR) packaging is optimized for high-speed automated pick-and-place assembly equipment. Cut Tape (CT) packaging is suitable for manual assembly, lower-volume production, or equipment that does not require continuous reel feeding. Both formats contain the same component.

Q: Are both parts RoHS compliant?

A: Yes, both MBA02040C4530FRP00 and MBA02040C4530FC100 are ROHS3 compliant and suitable for applications requiring RoHS certification.

Q: Which part should I choose if both are available?

A: Selection should be based on your assembly process. If your production line uses automated equipment with reel-fed capability, the MBA02040C4530FRP00 (Tape & Reel) is appropriate. If you use manual assembly or equipment that accepts cut tape, the MBA02040C4530FC100 is suitable. Both are equivalent from an electrical and mechanical standpoint.