MBA02040C4530FCT00 Equivalent & Substitute Parts

Part Overview

The MBA02040C4530FCT00 is a 453 Ohm ±1% 0.4W through-hole axial resistor manufactured by Vishay Beyschlag/Draloric/BC Components. This metal film resistor meets automotive AEC-Q200 qualification standards and operates across the temperature range of -55°C to 155°C. The component is currently in active production status with 1111 pieces available in original stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical, enabling procurement flexibility without functional compromise.

Substiute Parts

MBA02040C4530FCT00

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1155MBA02040C4530FCT00 Datasheet

Current PartRFQ

MBA02040C4530FC100

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1969MBA02040C4530FC100 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBA02040C4530FCT00 is determined by strict equivalence across electrical and mechanical parameters. The primary differentiator between the main part and identified substitutes is packaging format. Both the main part (Tape & Box format) and substitute part (Cut Tape format) maintain identical resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, physical dimensions, and automotive qualification status. The packaging difference does not affect component performance or board-level functionality, making substitution valid for applications where packaging format flexibility is acceptable.

Key parameters governing substitution:

• Resistance: 453 Ohms
• Tolerance: ±1%
• Power Rating: 0.4W
• Composition: Metal Film
• Temperature Coefficient: ±50ppm/°C
• Operating Temperature: -55°C to 155°C
• Physical Dimensions: 0.063" Dia x 0.142" L
• Automotive AEC-Q200 Compliance

Parameter Comparison

Engineering Selection Recommendations

Both the MBA02040C4530FCT00 and MBA02040C4530FC100 are active production components from Vishay Beyschlag/Draloric/BC Components with identical electrical specifications and automotive AEC-Q200 certification. Selection between these parts should be based on packaging requirements and inventory availability. The Tape & Box format (MBA02040C4530FCT00) is suitable for applications requiring bulk packaging with protective boxing. The Cut Tape format (MBA02040C4530FC100) accommodates automated pick-and-place assembly processes and offers higher current inventory (1957 pieces versus 1111 pieces). Both components maintain ROHS3 compliance and are suitable for automotive applications operating within the -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can MBA02040C4530FC100 be used as a direct replacement for MBA02040C4530FCT00?

A: Yes. Both parts are electrically and mechanically identical with 453 Ohm resistance, ±1% tolerance, 0.4W power rating, and identical physical dimensions. The only difference is packaging format (Cut Tape versus Tape & Box), which does not affect component performance or board-level functionality.

Q: What is the difference between Tape & Box and Cut Tape packaging?

A: Tape & Box packaging provides components wound on tape and enclosed in protective boxes, suitable for manual handling and bulk storage. Cut Tape packaging provides components on tape cut to specific lengths, optimized for automated assembly equipment and component feeders.

Q: Are both parts suitable for automotive applications?

A: Yes. Both MBA02040C4530FCT00 and MBA02040C4530FC100 meet AEC-Q200 automotive qualification standards and are rated for operation across -55°C to 155°C, meeting automotive temperature and reliability requirements.

Q: Do both parts have the same physical dimensions?

A: Yes. Both components share identical axial package dimensions of 0.063" diameter by 0.142" length (1.60mm x 3.60mm), ensuring compatibility with the same PCB footprints and assembly processes.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant and REACH unaffected. Neither part is subject to moisture sensitivity level (MSL) restrictions.