Equivalent & Substitute Parts for MBA02040C2402FRP00

Part Overview

The MBA02040C2402FRP00 is a 24 kOhms ±1% 0.4W through-hole resistor in axial package configuration, manufactured by Vishay Beyschlag/Draloric/BC Components. This metal film resistor meets automotive AEC-Q200 qualification standards and operates across the temperature range of -55°C to 155°C. The part is currently active in production with 1097 pieces available in stock. Substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained while packaging or supply chain considerations necessitate alternative sourcing.

Substiute Parts

MBA02040C2402FRP00

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1129MBA02040C2402FRP00 Datasheet

Current PartRFQ

MBA02040C2402FC100

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 11140MBA02040C2402FC100 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBA02040C2402FRP00 is determined by strict equivalence across the following critical parameters:

• Resistance value: 24 kOhms
• Tolerance: ±1%
• Power rating: 0.4W
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• Physical dimensions: 0.063" Dia x 0.142" L (1.60mm x 3.60mm)
• Termination count: 2

The identified substitute part maintains all electrical and mechanical specifications. The primary distinction lies in packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is available in Cut Tape (CT) format. Both formats originate from the same manufacturing series (MBA/SMA 0204 - Professional) and carry identical compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the MBA02040C2402FRP00 and MBA02040C2402FC100 are active production parts manufactured by Vishay Beyschlag/Draloric/BC Components within the same professional-grade series. Selection between these parts should be based on packaging requirements and supply chain logistics rather than electrical performance or compliance considerations.

The main part (MBA02040C2402FRP00) in Tape & Reel format is suitable for high-volume automated assembly operations. The substitute part (MBA02040C2402FC100) in Cut Tape format accommodates lower-volume applications or manual assembly workflows. Both parts maintain identical ROHS3 compliance, REACH unaffected status, and automotive AEC-Q200 qualification across all operating conditions.

Frequently Asked Questions (FAQ)

Q: Can MBA02040C2402FC100 be used as a direct replacement for MBA02040C2402FRP00?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format: Tape & Reel versus Cut Tape. Substitution is valid for any application where the axial resistor specifications are met.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, optimized for automated pick-and-place assembly. Cut Tape (CT) packaging provides components on tape segments, suitable for manual handling or lower-volume assembly. Both formats contain identical components.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical certifications: ROHS3 Compliant, REACH Unaffected, and automotive AEC-Q200 qualification. Compliance status is equivalent across all regulatory frameworks.

Q: Can these parts be used interchangeably in automotive applications?

A: Yes. Both parts meet AEC-Q200 automotive qualification standards and operate across the identical temperature range (-55°C to 155°C). They are suitable for equivalent automotive circuit applications.

Q: What inventory levels are available for each part?

A: MBA02040C2402FRP00 (Tape & Reel) has 1097 pieces in stock. MBA02040C2402FC100 (Cut Tape) has 11030 pieces in stock. Availability may vary based on current demand and supply conditions.