MBA02040C2000FCT00 Equivalent & Substitute Parts

Part Overview

The MBA02040C2000FCT00 is a 200 Ohms ±1% 0.4W through-hole resistor in axial package configuration, manufactured by Vishay Beyschlag/Draloric/BC Components. This metal film resistor meets automotive AEC-Q200 qualification standards and operates across the temperature range of -55°C to 155°C. The part is actively produced and maintained in inventory, with 1673 units currently available as new original stock. Substitute parts are identified when primary part availability is constrained or when procurement from alternative stock sources is required.

Substiute Parts

MBA02040C2000FCT00

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1708MBA02040C2000FCT00 Datasheet

Current PartRFQ

MBA02040C2000FC100

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 2330MBA02040C2000FC100 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBA02040C2000FCT00 is determined by strict equivalence across the following critical parameters:

• Resistance value: 200 Ohms
• Tolerance: ±1%
• Power rating: 0.4W
• Composition: Metal Film
• Package configuration: Axial
• Temperature coefficient: ±50ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• Physical dimensions: 0.063" Dia × 0.142" L (1.60mm × 3.60mm)
• Termination count: 2
• Compliance: ROHS3 Compliant, REACH Unaffected

The identified substitute part maintains identical electrical and mechanical specifications, ensuring direct functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the MBA02040C2000FCT00 and MBA02040C2000FC100 are active production parts from the same manufacturer series (MBA/SMA 0204 - Professional). Selection between these parts is based on inventory availability and procurement lead time requirements. Both parts maintain identical electrical performance, mechanical compatibility, and regulatory compliance status. The MBA02040C2000FC100 carries higher current inventory (2245 units versus 1673 units), which may provide advantages for expedited procurement scenarios. Both parts satisfy automotive AEC-Q200 qualification requirements and ROHS3 compliance mandates.

Frequently Asked Questions (FAQ)

Q: Can MBA02040C2000FC100 be used as a direct replacement for MBA02040C2000FCT00?

A: Yes. Both parts are parametrically equivalent across all electrical and mechanical specifications, including resistance value, tolerance, power rating, temperature coefficient, operating temperature range, package dimensions, and automotive qualification status.

Q: Are there any differences in circuit performance between these two part numbers?

A: No. The parts are functionally identical. Differences in part numbering reflect manufacturing lot or packaging configuration variations that do not affect electrical performance or mechanical fit.

Q: What is the significance of the different part number suffixes (FCT00 versus FC100)?

A: The suffix variations indicate different manufacturing batches or packaging configurations within the same product specification. Both parts meet identical performance and compliance requirements.

Q: Can these axial resistors be used in automated assembly processes?

A: Yes. Both parts are supplied in Cut Tape (CT) packaging, which is compatible with standard component feeders and automated insertion equipment for through-hole assembly.

Q: Are both parts suitable for automotive applications?

A: Yes. Both parts carry AEC-Q200 automotive qualification and operate across the -55°C to 155°C temperature range required for automotive environments.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component procurement.