Equivalent & Substitute Parts for MBA02040C1471FRP00

Part Overview

The MBA02040C1471FRP00 is a 1.47 kOhms ±1% 0.4W through-hole resistor in axial package configuration, manufactured by Vishay Beyschlag/Draloric/BC Components. This metal film resistor meets automotive AEC-Q200 qualification standards and operates across the temperature range of -55°C to 155°C. The part is currently active in production with 705 units available in tape and reel packaging. Substitute parts are identified to address packaging format availability and inventory requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

MBA02040C1471FRP00

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 793MBA02040C1471FRP00 Datasheet

Current PartRFQ

MBA02040C1471FC100

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1909MBA02040C1471FC100 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MBA02040C1471FRP00 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part MBA02040C1471FC100 maintains identical specifications for resistance value, tolerance, power rating, composition, temperature coefficient, operating temperature range, package type, physical dimensions, and automotive qualification status. The only difference between the main part and substitute is the packaging format: the main part is supplied in tape and reel (TR) configuration, while the substitute is supplied in cut tape (CT) configuration. Both formats contain the same component and are suitable for applications where packaging format does not impose assembly constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the MBA02040C1471FRP00 and MBA02040C1471FC100 are active production parts manufactured by Vishay Beyschlag/Draloric/BC Components with identical electrical performance and mechanical compatibility. Selection between these parts should be based on packaging format requirements and assembly process compatibility. The tape and reel format (FRP00) is optimized for high-volume automated assembly operations, while the cut tape format (FC100) provides flexibility for lower-volume or manual assembly processes. Both parts maintain full compliance with ROHS3 and automotive AEC-Q200 standards, ensuring suitability for regulated applications. Inventory availability should be considered as a secondary factor in component selection.

Frequently Asked Questions (FAQ)

Q: Can MBA02040C1471FC100 be used as a direct replacement for MBA02040C1471FRP00?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: tape and reel versus cut tape. Substitution is valid provided the assembly process can accommodate cut tape packaging.

Q: What is the difference between tape and reel (TR) and cut tape (CT) packaging?

A: Tape and reel packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut tape packaging supplies components on individual tape segments, typically used for manual assembly or lower-volume production runs. Both formats contain identical components.

Q: Are both parts automotive qualified?

A: Yes. Both MBA02040C1471FRP00 and MBA02040C1471FC100 meet AEC-Q200 automotive qualification standards and are suitable for automotive applications requiring this certification.

Q: Do these parts have identical physical dimensions?

A: Yes. Both parts measure 0.063" diameter by 0.142" length (1.60mm x 3.60mm) and are housed in identical axial package configurations.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant and REACH unaffected. Neither part is subject to moisture sensitivity level classification.