Equivalent & Substitute Parts for MB7780-730 Ultrasonic Sensor

Part Overview

The MB7780-730 from MaxBotix Inc. is an ultrasonic sensor categorized as a transmitter and receiver operating at a frequency of 42kHz. It features a beam angle of 23° and is rated for operation between 10 V and 32 V, with an operating temperature range from -40°C to 65°C. The product is ROHS3 compliant and classified under ECCN EAR99, with HTSUS code 8543.70.4500. The MB7780-730 is currently listed as obsolete, necessitating the identification of suitable alternative models that match its core electrical and mechanical specifications within the same category.

Substiute Parts

MB7780-730

MaxBotix Inc.In Stock: 914MB7780-730 Datasheet

Current PartRFQ

MB7780-731

MaxBotix Inc.In Stock: 877MB7780-731 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Selection of substitute models for MB7780-730 is strictly determined by alignment with the key parameters: type (Transmitter, Receiver), frequency (42kHz), rated voltage (10 V ~ 32 V), beam angle (23°), operating temperature range (-40°C ~ 65°C), packaging configuration (Bulk), RoHS compliance, ECCN, and HTSUS classification. Only parts matching these criteria are grouped as valid substitutes.

Parameter Comparison

Engineering Selection Recommendations

For direct replacement of MB7780-730, select the MB7780-731 ultrasonic sensor. Both parts match across all critical electrical, mechanical, and regulatory parameters including frequency, voltage rating, beam angle, operating temperature range, packaging (Bulk), ROHS3 compliance, ECCN (EAR99), and HTSUS code (8543.70.4500). MB7780-731 is active and supports continued production requirements.

Frequently Asked Questions (FAQ)

Q1: What criteria are used to determine a substitute part for MB7780-730?
A1: Substitution is based strictly on matching series, type, frequency, voltage rating, beam angle, operating temperature range, packaging, RoHS Status, ECCN, and HTSUS.

Q2: Is MB7780-731 fully compatible as a replacement for MB7780-730?
A2: MB7780-731 is compatible with MB7780-730, matching all provided key parameters within the specified category.

Q3: Are packaging differences relevant for substitution?
A3: Both MB7780-730 and MB7780-731 are provided in Bulk packaging; packaging considerations are aligned.

Q4: Does the RoHS status affect selection?
A4: Both part numbers are ROHS3 Compliant, meeting regulatory requirements for restriction of hazardous substances.

Q5: Is there any difference in environmental or certification status between MB7780-730 and MB7780-731?
A5: Both parts share identical status for RoHS compliance, ECCN, and HTSUS classification.

Q6: Does the product status of ‘Obsolete’ impact my selection process?
A6: Replacement selection is based on locating an active part, such as MB7780-731, which matches all core parameters and is currently available.