MB7780-710 Equivalent & Substitute Parts

Part Overview

The MB7780-710 is an ultrasonic sensor from MaxBotix Inc.'s 4-20SC-MaxSonar-WR series, operating at 42kHz with a 23° beam angle. This component functions as both a transmitter and receiver for distance measurement applications. The MB7780-710 is classified as obsolete, making identification of active equivalent parts essential for ongoing system support and new designs. The substitute part MB7780-711 provides functional continuity while maintaining identical electrical and mechanical specifications.

Substiute Parts

MB7780-710

MaxBotix Inc.In Stock: 1063MB7780-710 Datasheet

Current PartRFQ

MB7780-711

MaxBotix Inc.In Stock: 1248MB7780-711 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The MB7780-711 qualifies as a direct substitute for the MB7780-710 based on the following criteria:

• Identical frequency specification (42kHz)
• Identical voltage rating (10 V ~ 32 V)
• Identical beam angle (23°)
• Identical operating temperature range (-40°C ~ 65°C)
• Identical functional type (Transmitter, Receiver)
• Identical RoHS3 compliance status
• Same base product number (MB7780)
• Same series designation (4-20SC-MaxSonar-WR)

The primary distinction is product status: MB7780-710 is obsolete while MB7780-711 is active, with MB7780-711 available in bulk packaging.

Parameter Comparison

Engineering Selection Recommendations

For new designs and ongoing system support, MB7780-711 is the appropriate selection. This part maintains full electrical and mechanical compatibility with MB7780-710 while offering active product status and established supply chain availability. Both components meet ROHS3 compliance requirements and carry identical ECCN (EAR99) and HTSUS (8543.70.4500) classifications, ensuring regulatory consistency across applications.

Frequently Asked Questions (FAQ)

Q: Can MB7780-711 directly replace MB7780-710 in existing designs?

A: Yes. All electrical parameters (frequency, voltage rating, operating temperature) and mechanical specifications (beam angle, type) are identical between the two parts.

Q: What is the primary reason for substitution?

A: MB7780-710 is obsolete. MB7780-711 is the active equivalent from the same manufacturer and series, providing continued availability and support.

Q: Are there packaging differences between these parts?

A: MB7780-710 is supplied in standard packaging, while MB7780-711 is available in bulk packaging. This does not affect electrical or mechanical performance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both MB7780-710 and MB7780-711 are ROHS3 compliant with identical ECCN and HTSUS classifications.

Q: Are there any frequency or voltage differences?

A: No. Both parts operate at 42kHz and support the identical voltage range of 10 V ~ 32 V.