MB7780-210 Equivalent & Substitute Parts

Part Overview

The MB7780-210 is an ultrasonic sensor from MaxBotix Inc.'s 4-20SC-MaxSonar-WR series, operating at 42kHz with a 23° beam angle. This component functions as both a transmitter and receiver for distance measurement applications. The MB7780-210 is classified as obsolete, making identification of active equivalent parts essential for ongoing system support and new designs. Substitute parts must maintain identical electrical specifications, mechanical compatibility, and functional performance to ensure seamless integration into existing or new applications.

Substiute Parts

MB7780-210

MaxBotix Inc.In Stock: 1107MB7780-210 Datasheet

Current PartRFQ

MB7780-211

MaxBotix Inc.In Stock: 936MB7780-211 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB7780-210 is determined by strict equivalence across the following parameters:

• Operating frequency: 42kHz
• Voltage rating: 10 V ~ 32 V
• Beam angle: 23°
• Operating temperature range: -40°C ~ 65°C
• Functional type: Transmitter and Receiver
• Series classification: 4-20SC-MaxSonar-WR
• RoHS compliance: ROHS3 Compliant

The MB7780-211 meets all substitution criteria, differing only in product status (active versus obsolete) and packaging configuration (bulk versus standard).

Parameter Comparison

Engineering Selection Recommendations

The MB7780-211 is the direct equivalent substitute for the MB7780-210. Both components share identical electrical and mechanical specifications across all critical parameters. The primary distinction is product lifecycle status: the MB7780-210 is obsolete while the MB7780-211 remains active. For new designs and ongoing system support, the MB7780-211 is the appropriate selection. Both parts maintain ROHS3 compliance and are manufactured by MaxBotix Inc. within the same product series. Packaging differences (bulk versus standard) do not affect functional compatibility and should be evaluated based on procurement and inventory requirements.

Frequently Asked Questions (FAQ)

Q: Can the MB7780-211 directly replace the MB7780-210 in existing applications?

A: Yes. The MB7780-211 is electrically and mechanically equivalent to the MB7780-210. All critical parameters—frequency, voltage rating, beam angle, operating temperature, and functional type—are identical. The substitution is direct with no circuit modifications required.

Q: What is the difference between the MB7780-210 and MB7780-211?

A: The MB7780-210 is classified as obsolete, while the MB7780-211 is active. Packaging differs (standard versus bulk), but electrical and mechanical specifications are identical.

Q: Why is the MB7780-210 obsolete?

A: Product obsolescence is determined by manufacturer lifecycle decisions. The MB7780-211 serves as the active equivalent and should be used for new designs and replacements.

Q: Are there any compatibility concerns when switching from MB7780-210 to MB7780-211?

A: No compatibility concerns exist. Both components operate at 42kHz, accept 10 V ~ 32 V input, maintain a 23° beam angle, and function across -40°C ~ 65°C. Pin configuration and functional behavior are identical.

Q: Does packaging type affect performance?

A: Packaging type (standard versus bulk) does not affect electrical or mechanical performance. Selection should be based on procurement volume and inventory management requirements.