MB7780-200 Equivalent & Substitute Parts Reference

Part Overview

The MB7780-200 from MaxBotix Inc. is an ultrasonic sensor, categorized under transmitters and receivers, operating at a frequency of 42kHz. It is part of the 4-20SC-MaxSonar-WR series, supporting a voltage range of 10 V to 32 V and a beam angle of 23°. Its operational temperature spans -40°C to 65°C. The MB7780-200 is currently listed as obsolete, which necessitates identifying equivalent or substitute models for continued design support or replacement in existing applications.

Substiute Parts

MB7780-200

MaxBotix Inc.In Stock: 1176MB7780-200 Datasheet

Current PartRFQ

MB7780-201

MaxBotix Inc.In Stock: 893MB7780-201 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is strictly determined by matching all critical parameters: type (transmitter/receiver), frequency (42kHz), voltage rating (10 V ~ 32 V), beam angle (23°), operating temperature range (-40°C ~ 65°C), RoHS compliance, ECCN, HTSUS code, and packaging format. Only parts matching these criteria are considered valid substitutes for the MB7780-200.

Parameter Comparison

Engineering Selection Recommendations

Selection of the MB7780-201 as a substitute for the MB7780-200 is supported by identical values in all provided parameters, including electrical characteristics, mechanical configuration, compliance, and packaging. The MB7780-201 maintains ROHS3 compliance, ECCN EAR99, and HTSUS 8543.70.4500, consistent with the obsolete MB7780-200. Inventory is confirmed for new original stock.

Frequently Asked Questions (FAQ)

Q: What parameters must match for a valid MB7780-200 substitute?
A: Substitute parts must have matching type, frequency, voltage rating, beam angle, operating temperature range, RoHS status, ECCN, HTSUS, and packaging.

Q: Do differences in series or part status affect substitution eligibility?
A: Substitution eligibility relies entirely on matching the provided key parameters. Series designation and part status are not substitution limiting if core parameters are identical.

Q: Is packaging a factor in selecting substitute ultrasonic sensors?
A: Yes, packaging must match as specified; both MB7780-200 and MB7780-201 use bulk packaging.

Q: Are there compliance considerations for replacing MB7780-200?
A: Both MB7780-200 and MB7780-201 are ROHS3 compliant, have the same ECCN, and share the same HTSUS codes, maintaining regulatory consistency.

Q: Can MB7780-201 be directly used in MB7780-200 designs?
A: Based on the provided parameters, MB7780-201 matches all electrical, mechanical, and certification criteria for direct substitution.