MB7480-710 Equivalent & Substitute Parts

Part Overview

The MB7480-710 is an ultrasonic sensor from MaxBotix Inc.'s 4-20HR-MaxSonar-WR series, operating at 42kHz with a 23° beam angle. This component functions as a transmitter and receiver unit rated for 10V to 32V operation across -40°C to 65°C. The part is currently classified as obsolete, making identification of compatible substitutes essential for ongoing system support and procurement planning.

Substiute Parts

MB7480-710

MaxBotix Inc.In Stock: 1085MB7480-710 Datasheet

Current PartRFQ

MB7480-711

MaxBotix Inc.In Stock: 977MB7480-711 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB7480-710 is determined by strict alignment across the following parameters:

• Manufacturer series consistency (4-20HR-MaxSonar-WR)
• Operating frequency (42kHz)
• Voltage rating range (10V ~ 32V)
• Beam angle specification (23°)
• Temperature operating range (-40°C ~ 65°C)
• Functional type (Transmitter, Receiver)
• Regulatory compliance (ROHS3)

The MB7480-711 meets all these criteria and is identified as a direct substitute. Both parts share the same base product number (MB7480) and maintain identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The MB7480-711 is the qualified substitute for the obsolete MB7480-710. Both components maintain identical electrical specifications, mechanical dimensions, and regulatory certifications. The primary distinction is product status: MB7480-711 is currently active in production, whereas MB7480-710 is obsolete. For new designs or system replacements, MB7480-711 should be specified. Both parts carry ROHS3 compliance and equivalent ECCN/HTSUS classifications, ensuring regulatory consistency in procurement and deployment.

Frequently Asked Questions (FAQ)

Q: Can MB7480-711 directly replace MB7480-710 in existing designs?

A: Yes. Both parts are electrically and mechanically identical, sharing the same base product number, frequency, voltage rating, beam angle, and operating temperature range. No circuit modifications are required.

Q: What is the difference between MB7480-710 and MB7480-711?

A: The parts are functionally equivalent. The primary difference is packaging designation and product status. MB7480-710 is obsolete; MB7480-711 is active production.

Q: Are there any compliance differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, ECCN (EAR99), and HTSUS classifications.

Q: Which part should be specified for new procurement?

A: MB7480-711 should be specified for all new orders and designs, as it is the active production variant.

Q: Do these parts have identical beam angles and operating frequencies?

A: Yes. Both operate at 42kHz with a 23° beam angle and are rated for -40°C to 65°C operation.