MB7480-610 Equivalent & Substitute Parts

Part Overview

The MB7480-610 is an ultrasonic sensor from MaxBotix Inc.'s 4-20HR-MaxSonar-WR series, operating at 42kHz with a 23° beam angle. This component functions as a transmitter and receiver for distance measurement applications. The MB7480-610 is classified as obsolete, making identification of active equivalent parts essential for ongoing system support and new designs. Substitute parts must maintain identical electrical specifications, frequency characteristics, and mechanical compatibility to ensure drop-in replacement capability.

Substiute Parts

MB7480-610

MaxBotix Inc.In Stock: 986MB7480-610 Datasheet

Current PartRFQ

MB7480-611

MaxBotix Inc.In Stock: 1039MB7480-611 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MB7480-610 is determined by strict equivalence across the following critical parameters:

• Frequency: 42kHz operation is mandatory for signal compatibility
• Voltage Rating: 10 V ~ 32 V supply range must be maintained
• Beam Angle: 23° beam angle ensures identical detection geometry
• Operating Temperature: -40°C ~ 65°C range must be supported
• Functional Type: Transmitter and receiver capability required
• Series Compatibility: Parts must belong to the 4-20HR-MaxSonar-WR series
• Compliance: ROHS3 compliance status must be maintained

The MB7480-611 meets all substitution criteria as an active product variant within the same series with identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The MB7480-611 is the direct substitute for the obsolete MB7480-610. Both components are manufactured by MaxBotix Inc. and share identical electrical specifications, frequency characteristics, beam angle, and operating temperature range. The MB7480-611 maintains ROHS3 compliance and is currently in active production status, ensuring long-term availability and supply chain continuity.

Selection of the MB7480-611 is appropriate for replacement applications, redesigns, and new implementations where the MB7480-610 specifications are required. The active product status of the MB7480-611 provides superior availability compared to the obsolete MB7480-610.

Frequently Asked Questions (FAQ)

Q: Can the MB7480-611 directly replace the MB7480-610 in existing designs?

A: Yes. The MB7480-611 is electrically and mechanically equivalent to the MB7480-610 across all specified parameters, including frequency, voltage rating, beam angle, and operating temperature range. No circuit modifications are required.

Q: What is the primary difference between these two part numbers?

A: The MB7480-610 is obsolete, while the MB7480-611 is an active product. The MB7480-611 differs in packaging (Bulk) but maintains identical functional specifications.

Q: Are there any compliance differences between the MB7480-610 and MB7480-611?

A: No. Both components maintain ROHS3 compliance and share identical ECCN (EAR99) and HTSUS (8543.70.4500) classifications.

Q: What parameters must remain constant when substituting ultrasonic sensors in this series?

A: Frequency (42kHz), voltage rating (10 V ~ 32 V), beam angle (23°), and operating temperature range (-40°C ~ 65°C) are critical parameters that must be maintained for functional equivalence.