MB7469-710 Equivalent & Substitute Parts

Part Overview

The MB7469-710 is an ultrasonic sensor from MaxBotix Inc.'s 4-20HR-MaxSonar-WR series, operating at 42kHz with a 23° beam angle. This component functions as a transmitter and receiver for distance measurement applications. The MB7469-710 is currently classified as obsolete, making identification of active equivalent parts essential for ongoing system support and new designs.

Substiute Parts

MB7469-710

MaxBotix Inc.In Stock: 1030MB7469-710 Datasheet

Current PartRFQ

MB7469-711

MaxBotix Inc.In Stock: 1149MB7469-711 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MB7469-710 is based on electrical and mechanical parameter equivalence within the MaxBotix 4-20HR-MaxSonar-WR series. The substitute part must maintain identical specifications across the following critical parameters:

• Operating frequency: 42kHz
• Voltage rating: 10 V ~ 32 V
• Beam angle: 23°
• Operating temperature range: -40°C ~ 65°C
• Functional type: Transmitter and Receiver
• RoHS compliance: ROHS3 Compliant
• Base product number: MB7469

The MB7469-711 meets all these criteria and is classified as an active product, making it suitable for direct substitution in applications currently using the MB7469-710.

Parameter Comparison

Engineering Selection Recommendations

The MB7469-711 is the direct equivalent for the obsolete MB7469-710. Both components share identical electrical and mechanical specifications, including frequency, voltage rating, beam angle, and operating temperature range. The MB7469-711 carries active product status from MaxBotix Inc., ensuring continued availability and support. Both parts maintain ROHS3 compliance and EAR99 export classification. Selection of the MB7469-711 eliminates obsolescence risk while preserving full functional compatibility with existing circuit designs and mechanical assemblies.

Frequently Asked Questions (FAQ)

Q: Can the MB7469-711 directly replace the MB7469-710 in existing designs?

A: Yes. The MB7469-711 is electrically and mechanically equivalent to the MB7469-710. All critical parameters—frequency, voltage rating, beam angle, operating temperature, and functional type—are identical between the two parts.

Q: What is the primary difference between these two parts?

A: The MB7469-710 is obsolete, while the MB7469-711 is active. The MB7469-711 is available in bulk packaging, whereas the MB7469-710 was supplied with standard packaging. Functionally, both parts are equivalent.

Q: Are there any compliance or certification differences?

A: No. Both the MB7469-710 and MB7469-711 are ROHS3 compliant and carry the same ECCN (EAR99) and HTSUS classifications.

Q: What packaging options are available for the substitute part?

A: The MB7469-711 is available in bulk packaging. Packaging selection should be based on procurement volume and assembly requirements.

Q: Are there any other substitutes within the MaxBotix 4-20HR-MaxSonar-WR series?

A: Based on the provided data, the MB7469-711 is the identified substitute. Any additional equivalents would require verification against the complete parameter set: 42kHz frequency, 10 V ~ 32 V voltage rating, 23° beam angle, and -40°C ~ 65°C operating temperature range.