MB7469-500 Equivalent & Substitute Parts

Part Overview

The MB7469-500 is an ultrasonic sensor from MaxBotix Inc.'s 4-20HR-MaxSonar-WR series, operating at 42kHz with a 23° beam angle. This component functions as both a transmitter and receiver for distance measurement applications. The MB7469-500 is classified as obsolete, making identification of active equivalent parts essential for ongoing procurement and system maintenance.

Substiute Parts

MB7469-500

MaxBotix Inc.In Stock: 701MB7469-500 Datasheet

Current PartRFQ

MB7469-501

MaxBotix Inc.In Stock: 866MB7469-501 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The MB7469-501 qualifies as a direct substitute for the MB7469-500 based on the following alignment of critical electrical and mechanical parameters:

• Identical frequency specification: 42kHz
• Identical voltage rating: 10 V ~ 32 V
• Identical beam angle: 23°
• Identical operating temperature range: -40°C ~ 65°C (TA)
• Identical component type: Transmitter, Receiver
• Identical series designation: 4-20HR-MaxSonar-WR
• Identical base product number: MB7469
• Identical RoHS compliance: ROHS3 Compliant

The primary distinction is product status: MB7469-501 is active, whereas MB7469-500 is obsolete. Packaging differs (Bulk for MB7469-501 versus dash notation for MB7469-500), but this does not affect functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

The MB7469-501 is the direct functional equivalent for the obsolete MB7469-500. Both components maintain identical electrical specifications, mechanical dimensions (beam angle), and environmental operating ranges. The MB7469-501 carries active product status with confirmed inventory availability (808 Pcs), ensuring supply chain continuity. Both parts maintain ROHS3 compliance and identical regulatory classifications (ECCN: EAR99, HTSUS: 8543.70.4500).

For new designs or component replacement in existing systems, the MB7469-501 provides equivalent performance without design modification. Packaging format (Bulk) is suitable for standard procurement workflows.

Frequently Asked Questions (FAQ)

Q: Can MB7469-501 replace MB7469-500 in existing applications? A: Yes. Both components share identical electrical ratings (10 V ~ 32 V), frequency (42kHz), beam angle (23°), and operating temperature range (-40°C ~ 65°C). No circuit or mechanical modifications are required.

Q: What is the primary reason to substitute MB7469-500? A: MB7469-500 is classified as obsolete. MB7469-501 is the active equivalent, ensuring long-term supply availability and continued manufacturer support.

Q: Are there differences in RoHS compliance between these parts? A: No. Both MB7469-500 and MB7469-501 are ROHS3 compliant with identical regulatory classifications.

Q: Does packaging format affect compatibility? A: Packaging format (Bulk for MB7469-501) does not affect functional performance or electrical compatibility. It impacts procurement and handling procedures only.

Q: What certifications apply to both parts? A: Both components carry ECCN: EAR99 and HTSUS: 8543.70.4500 classifications, indicating identical export and tariff treatment.