MB7460-610 Equivalent & Substitute Parts

Part Overview

The MB7460-610 is an ultrasonic sensor from MaxBotix Inc.'s 4-20HR-MaxSonar-WR series, operating at 42kHz with a 23° beam angle. This component functions as a transmitter and receiver for distance measurement applications. The MB7460-610 is classified as obsolete, making identification of active equivalent parts essential for ongoing system support and new designs.

Substiute Parts

MB7460-610

MaxBotix Inc.In Stock: 819MB7460-610 Datasheet

Current PartRFQ

MB7460-611

MaxBotix Inc.In Stock: 1108MB7460-611 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB7460-610 is determined by strict equivalence across the following critical parameters:

• Frequency: 42kHz
• Voltage Rating: 10 V ~ 32 V
• Beam Angle: 23°
• Operating Temperature Range: -40°C ~ 65°C (TA)
• Type: Transmitter, Receiver
• Series: 4-20HR-MaxSonar-WR
• Base Product Number: MB7460
• RoHS Compliance: ROHS3 Compliant

The MB7460-611 meets all substitution criteria, differing only in product status (Active vs. Obsolete) and packaging configuration (Bulk vs. standard packaging).

Parameter Comparison

Engineering Selection Recommendations

The MB7460-611 is the direct substitute for the MB7460-610. Both components share identical electrical and mechanical specifications, including frequency, voltage rating, beam angle, and operating temperature range. The primary distinction is product status: the MB7460-610 is obsolete while the MB7460-611 is active.

For new designs and ongoing system support, the MB7460-611 is the appropriate selection. Both parts maintain ROHS3 compliance and are manufactured by MaxBotix Inc. within the same 4-20HR-MaxSonar-WR series. Packaging differences (Bulk for MB7460-611) do not affect functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can the MB7460-611 replace the MB7460-610 in existing applications?

A: Yes. The MB7460-611 is functionally equivalent to the MB7460-610 across all electrical and mechanical parameters. Both operate at 42kHz with identical voltage ratings (10 V ~ 32 V), beam angle (23°), and temperature range (-40°C ~ 65°C).

Q: What is the difference between MB7460-610 and MB7460-611?

A: The components are electrically and mechanically identical. The MB7460-610 is obsolete, while the MB7460-611 is active. Packaging differs (Bulk for MB7460-611), but this does not affect functional performance or pin compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both the MB7460-610 and MB7460-611 are ROHS3 compliant.

Q: What parameters determine substitution eligibility?

A: Substitution is based on frequency (42kHz), voltage rating (10 V ~ 32 V), beam angle (23°), operating temperature range (-40°C ~ 65°C), component type (Transmitter, Receiver), and series designation (4-20HR-MaxSonar-WR).

Q: Can I use these parts interchangeably in PCB designs?

A: Yes. Both parts share the same base product number (MB7460) and series designation, ensuring pin-compatible operation in circuits designed for the 4-20HR-MaxSonar-WR ultrasonic sensor platform.