MB2065SS2W30-CA Equivalent & Substitute Parts

Part Overview

The MB2065SS2W30-CA is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with a standard through-hole, right-angle mounting design. This component is rated for 6A at 125V AC and 3A at 30V DC, with a round black button actuator and PC pin termination. The product is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance and component procurement.

Substiute Parts

MB2065SS2W30-CA

NKK SwitchesIn Stock: 2687MB2065SS2W30-CA Datasheet

Current PartRFQ

MBN12SS2W30-CA

NKK SwitchesIn Stock: 1429MBN12SS2W30-CA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB2065SS2W30-CA is determined by the following critical parameters:

• Circuit configuration (SPDT)
• Current and voltage ratings (6A/125V AC minimum; 3A/30V DC minimum)
• Mounting type (Through Hole, Right Angle)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Mechanical and electrical life specifications
• RoHS and regulatory compliance status

The substitute part MBN12SS2W30-CA is identified as the manufacturer-recommended equivalent. Both parts are manufactured by NKK Switches and maintain ROHS3 compliance, ensuring regulatory alignment for replacement applications.

Parameter Comparison

Engineering Selection Recommendations

The MBN12SS2W30-CA is the manufacturer-recommended substitute for the obsolete MB2065SS2W30-CA. Both components maintain ROHS3 compliance and are sourced from the same manufacturer, ensuring design continuity and regulatory alignment. The substitute part carries active product status, providing assured long-term availability and supply chain stability compared to the obsolete original part.

Selection of the MBN12SS2W30-CA is appropriate for applications requiring direct replacement of the MB2065SS2W30-CA, with the added benefit of active manufacturing status and ongoing vendor support.

Frequently Asked Questions (FAQ)

Q: Why is the MB2065SS2W30-CA classified as obsolete? A: The MB2065SS2W30-CA is no longer in active production by NKK Switches. The manufacturer-recommended substitute MBN12SS2W30-CA provides equivalent functionality with active product status.

Q: What are the critical parameters for substitution compatibility? A: Substitution compatibility is determined by circuit configuration (SPDT), current/voltage ratings (6A/125V AC; 3A/30V DC), mounting type (Through Hole, Right Angle), termination style (PC Pin), and operating temperature range (-30°C to 85°C).

Q: Are both parts RoHS compliant? A: Yes, both the MB2065SS2W30-CA and MBN12SS2W30-CA are ROHS3 compliant, meeting current regulatory requirements for electronic component manufacturing.

Q: What is the difference in moisture sensitivity between the two parts? A: The main part specifies MSL 1 (Unlimited), while the substitute lists MSL as Not Applicable. Both designations indicate minimal moisture sensitivity risk for standard storage and handling conditions.

Q: Can the MBN12SS2W30-CA be used as a direct replacement? A: Yes, the MBN12SS2W30-CA is the manufacturer-recommended equivalent and serves as a direct replacement for the obsolete MB2065SS2W30-CA in applications requiring SPDT pushbutton switch functionality with the specified electrical and mechanical parameters.