MB2065LS1W01-CC Equivalent & Substitute Parts

Part Overview

The MB2065LS1W01-CC is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with 6A AC and 3A DC current ratings at 125V AC and 30V DC respectively. This component is classified as obsolete, making identification of equivalent substitute parts essential for ongoing system maintenance and new design implementations. The switch employs panel mount rear termination with solder lug connections and epoxy sealed terminals for environmental protection.

Substiute Parts

MB2065LS1W01-CC

NKK SwitchesIn Stock: 1173MB2065LS1W01-CC Datasheet

Current PartRFQ

MPA106D

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1203MPA106D Datasheet

SimilarRFQ

MPE106D

TE Connectivity ALCOSWITCH SwitchesIn Stock: 2240MPE106D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MB2065LS1W01-CC are identified based on the following critical parameters that determine functional equivalence:

• Circuit configuration: SPDT (both substitutes maintain this requirement)
• AC current rating: 6A minimum (both substitutes meet or exceed this specification)
• AC voltage rating: 125V (both substitutes match this requirement)
• Mounting configuration: Panel Mount, Rear with solder lug termination (both substitutes conform)
• Switch function: On-On operation (both substitutes provide this function)

The substitute parts MPA106D and MPE106D, both manufactured by TE Connectivity ALCOSWITCH Switches, satisfy these core electrical and mechanical parameters. Both are active products with current manufacturing status, addressing the obsolescence of the original MB2065LS1W01-CC component.

Parameter Comparison

Engineering Selection Recommendations

Both MPA106D and MPE106D are suitable substitutes for the obsolete MB2065LS1W01-CC based on electrical and mechanical compatibility. Both substitute parts are active products with current manufacturing availability, ensuring long-term supply chain reliability.

MPA106D provides a direct functional replacement with matching electrical specifications and active product status. This part is appropriate for standard applications requiring SPDT switching at 6A AC and 125V AC ratings.

MPE106D offers the same electrical performance as MPA106D with the additional feature of splash proof ingress protection. This variant is suitable for applications requiring enhanced environmental protection while maintaining identical electrical switching characteristics and panel mount configuration.

Both substitutes exceed the original part's electrical life specification at 50,000 cycles compared to the original 25,000 cycles. The DC voltage rating of 28V on both substitutes is lower than the original 30V specification; applications operating at DC voltages above 28V require evaluation against actual circuit requirements.

Frequently Asked Questions (FAQ)

Q: Can MPA106D and MPE106D be used interchangeably with MB2065LS1W01-CC?

A: Both parts satisfy the core electrical requirements: SPDT circuit, 6A AC current rating, and 125V AC voltage rating with panel mount rear solder lug termination. The primary difference is that MPE106D includes splash proof ingress protection, while MPA106D does not. Selection depends on environmental exposure requirements of the application.

Q: What is the impact of the 6.35mm panel cutout diameter on MPA106D and MPE106D compared to the 6.50mm requirement of MB2065LS1W01-CC?

A: The substitute parts require a 6.35mm panel cutout diameter, which is 0.15mm smaller than the original specification. Panel modifications may be necessary if existing cutouts are sized for 6.50mm diameter. Verify panel dimensions before implementation.

Q: Are there temperature range limitations when substituting with MPA106D or MPE106D?

A: The substitute parts operate within -20°C to 80°C, compared to the original -30°C to 85°C range. Applications requiring operation below -20°C or above 80°C are outside the specified operating range of the substitute parts and require alternative component selection.

Q: What is the significance of the higher electrical life rating on the substitute parts?

A: MPA106D and MPE106D are rated for 50,000 electrical cycles compared to 25,000 cycles for MB2065LS1W01-CC. This represents a doubling of the electrical life specification, providing extended component longevity in switching applications.

Q: How does the DC voltage rating difference affect component selection?

A: The substitute parts are rated for 28V DC maximum, compared to 30V DC for the original part. Applications operating at DC voltages between 28V and 30V require circuit evaluation to confirm compatibility with the lower substitute part rating.