MB2061SS2W45 Equivalent & Substitute Parts

Part Overview

The MB2061SS2W45 is a DPDT pushbutton switch manufactured by NKK Switches, designed for through-hole mounting in right-angle vertical orientation. This component features a plunger actuator with PC pin termination and epoxy sealed terminals, rated for 6A at 125V AC and 3A at 30V DC. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

MB2061SS2W45

NKK SwitchesIn Stock: 964MB2061SS2W45 Datasheet

Current PartRFQ

MBN25SS2W45

NKK SwitchesIn Stock: 1023MBN25SS2W45 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB2061SS2W45 is determined by the following critical parameters:

• Circuit configuration (DPDT)
• Switch function (On-Mom momentary operation)
• Current and voltage ratings (6A/125V AC minimum; 3A/30V DC minimum)
• Mounting type (through-hole, right-angle, vertical orientation)
• Termination style (PC pin)
• Actuator type (plunger for cap)
• Operating temperature range (-30°C to 85°C)
• Mechanical and electrical life specifications

The identified substitute MBN25SS2W45 from NKK Switches maintains compatibility within the MB2000 series ecosystem and meets the functional requirements for direct replacement in applications requiring DPDT momentary switching at the specified electrical ratings.

Parameter Comparison

Engineering Selection Recommendations

The MB2061SS2W45 is an obsolete component. The MBN25SS2W45 is listed as the manufacturer-recommended substitute and carries active product status, ensuring ongoing availability and support from NKK Switches. Selection of the active substitute part is appropriate for new designs and ongoing procurement where the MB2061SS2W45 is no longer available through standard distribution channels.

Verification of electrical and mechanical compatibility with the specific application circuit is required before implementation, as detailed electrical specifications for the substitute part were not provided in the available documentation.

Frequently Asked Questions (FAQ)

Q: Why is the MB2061SS2W45 being discontinued? A: The MB2061SS2W45 is classified as obsolete. NKK Switches has designated the MBN25SS2W45 as the manufacturer-recommended replacement.

Q: Can the MBN25SS2W45 be used as a direct replacement? A: The MBN25SS2W45 is the manufacturer-recommended substitute. However, complete electrical and mechanical specifications for the substitute part must be verified against your application requirements before implementation.

Q: What are the key parameters that determine substitution compatibility? A: Substitution compatibility is determined by circuit configuration (DPDT), switch function (On-Mom), current ratings (6A AC / 3A DC minimum), voltage ratings (125V AC / 30V DC minimum), mounting type (through-hole right-angle vertical), termination style (PC pin), and operating temperature range (-30°C to 85°C).

Q: Is the substitute part RoHS compliant? A: The main part MB2061SS2W45 is ROHS3 compliant. RoHS compliance status for the substitute part MBN25SS2W45 was not provided in the available documentation and should be confirmed with the manufacturer.

Q: What is the packaging difference between these parts? A: The MB2061SS2W45 packaging specification was not provided. The MBN25SS2W45 is supplied in bulk packaging.