MB2011SS2W13-CE Equivalent & Substitute Parts

Part Overview

The MB2011SS2W13-CE is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with a standard round yellow button actuator. This through-hole mounted component is rated for 6A at 125V AC and 3A at 30V DC, with epoxy sealed terminals for enhanced durability. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations where this component is specified.

Substiute Parts

MB2011SS2W13-CE

NKK SwitchesIn Stock: 1082MB2011SS2W13-CE Datasheet

Current PartRFQ

MBN15SS2W13-CE

NKK SwitchesIn Stock: 806MBN15SS2W13-CE Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MB2011SS2W13-CE is determined by the following critical electrical and mechanical parameters:

Electrical Compatibility Criteria:

• Circuit configuration (SPDT)
• Current rating minimum: 6A AC / 3A DC
• Voltage rating minimum: 125V AC / 30V DC
• Switch function (On-Mom momentary operation)

Mechanical Compatibility Criteria:

• Mounting type (Through Hole)
• Actuator type (Round Button)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Mechanical life minimum: 100,000 cycles

Regulatory Compliance:

• RoHS3 compliance required
• MSL rating: 1 (Unlimited)

The substitute part MBN15SS2W13-CE is evaluated against these parameters to determine functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

The MB2011SS2W13-CE is an obsolete product. The MBN15SS2W13-CE is listed as an active substitute from the same manufacturer (NKK Switches). However, complete electrical and mechanical parameter data for the MBN15SS2W13-CE is not provided in the available documentation.

For component selection, the following factors apply:

Product Status Consideration: The substitute part carries active product status, ensuring ongoing availability and manufacturing support compared to the obsolete main part.

Compliance Status: Both parts are manufactured by NKK Switches. Verification of RoHS3 compliance and regulatory certifications for the substitute part is required before final selection.

Data Completeness: Full electrical specifications (current rating, voltage rating, circuit configuration) and mechanical specifications (operating temperature, mechanical life) for the MBN15SS2W13-CE must be obtained from the manufacturer to confirm functional equivalence with the MB2011SS2W13-CE.

Frequently Asked Questions (FAQ)

Q: Why is the MB2011SS2W13-CE listed as obsolete? A: The product status indicates this component is no longer in active production. Existing inventory may be available, but long-term supply cannot be guaranteed. Alternative components should be identified for new designs or future procurement.

Q: What makes MBN15SS2W13-CE a suitable substitute? A: Both components are manufactured by NKK Switches. The substitute carries active product status, ensuring continued availability. However, complete parameter verification is required to confirm electrical and mechanical equivalence.

Q: What parameters must match for a valid substitution? A: Critical parameters include circuit configuration (SPDT), current rating (minimum 6A AC / 3A DC), voltage rating (minimum 125V AC / 30V DC), switch function (On-Mom), mounting type (Through Hole), actuator type (Round Button), and termination style (PC Pin).

Q: Are there packaging differences between the main part and substitute? A: The main part packaging is not specified in the available data. The substitute part is supplied in bulk packaging. Packaging format may affect procurement quantities and handling procedures.

Q: What compliance certifications apply to these components? A: The main part is ROHS3 compliant with MSL rating 1 (Unlimited). Compliance status for the substitute part must be verified with the manufacturer before selection.

Q: Can the substitute part be used in existing designs without modification? A: Mechanical and electrical parameter equivalence must be confirmed through complete specification comparison. Physical dimensions, pin configuration, and electrical performance must match the original component for direct substitution without circuit redesign.