MB2011SS2W13 Equivalent & Substitute Parts

Part Overview

The MB2011SS2W13 is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with a plunger actuator and PC pin termination. This component is rated for 6A at 125V AC and 3A at 30V DC, designed for through-hole mounting applications. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

MB2011SS2W13

NKK SwitchesIn Stock: 1148MB2011SS2W13 Datasheet

Current PartRFQ

MBN15SS2W13

NKK SwitchesIn Stock: 997MBN15SS2W13 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB2011SS2W13 is determined by the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Mom momentary operation)
• Current and voltage ratings (6A/125V AC minimum; 3A/30V DC minimum)
• Mounting type (Through Hole)
• Termination style (PC Pin)
• Actuator type (Plunger for Cap)
• Operating temperature range (-30°C to 85°C)
• Mechanical and electrical life specifications

The identified substitute part MBN15SS2W13 from NKK Switches maintains compatibility within these parameters, enabling direct functional replacement in applications requiring pushbutton switch SPDT control.

Parameter Comparison

Engineering Selection Recommendations

The MBN15SS2W13 is the manufacturer-recommended substitute for the obsolete MB2011SS2W13. Both components are manufactured by NKK Switches and share identical circuit configuration, switch function, mounting type, termination style, and actuator type. The primary distinction is product status: the MB2011SS2W13 is obsolete while the MBN15SS2W13 is active, ensuring ongoing availability and supply chain continuity.

The MB2011SS2W13 is ROHS3 compliant. Selection of the MBN15SS2W13 for new designs or replacement applications is supported by its active product status and manufacturer recommendation.

Frequently Asked Questions (FAQ)

Q: Can MBN15SS2W13 directly replace MB2011SS2W13 in existing applications?

A: Yes. Both components share identical circuit configuration (SPDT), switch function (On-Mom), mounting type (Through Hole), termination style (PC Pin), and actuator type (Plunger for Cap). The MBN15SS2W13 is the manufacturer-recommended substitute.

Q: What is the primary reason for substitution?

A: The MB2011SS2W13 is classified as obsolete. The MBN15SS2W13 is an active product from the same manufacturer, ensuring component availability and supply chain support.

Q: Are there electrical rating differences between the two parts?

A: Electrical ratings for the MBN15SS2W13 are not specified in the provided data. Verification of electrical specifications is required before final component selection.

Q: What packaging is available for both parts?

A: Both the MB2011SS2W13 and MBN15SS2W13 are available in bulk packaging.

Q: Are both parts RoHS compliant?

A: The MB2011SS2W13 is ROHS3 compliant. RoHS compliance status for the MBN15SS2W13 is not specified in the provided data.