MB2011SS2G30-CC Equivalent & Substitute Parts

Part Overview

The MB2011SS2G30-CC is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with 0.4VA current rating at 28V AC/DC. This component is designed for through-hole, right-angle mounting applications with a red round button actuator and PC pin termination. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations where this switch type is required.

Substiute Parts

MB2011SS2G30-CC

NKK SwitchesIn Stock: 965MB2011SS2G30-CC Datasheet

Current PartRFQ

MBN15SS2G30-CC

NKK SwitchesIn Stock: 846MBN15SS2G30-CC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MB2011SS2G30-CC is determined by the following critical parameters that must remain consistent across equivalent components:

• Circuit configuration (SPDT)
• Current and voltage ratings (0.4VA at 28V AC/DC)
• Mounting type (Through Hole, Right Angle)
• Actuator type and color (Round button, Red)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Mechanical and electrical life specifications

The identified substitute part MBN15SS2G30-CC is listed as an NKK Switches manufacturer-recommended alternative. This substitution is based on functional equivalence within the specified electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

The MB2011SS2G30-CC is designated as obsolete by the manufacturer. The substitute part MBN15SS2G30-CC is classified as active product status, indicating current manufacturing availability and ongoing support from NKK Switches. Selection of the active substitute part is appropriate for applications requiring component replacement or new procurement where the original obsolete part is no longer available through standard distribution channels.

The main part maintains ROHS3 compliance and MSL Level 1 rating. Compliance status for the substitute part is not provided in the available technical data. Verification of regulatory compliance requirements specific to your application is necessary before final component selection.

Frequently Asked Questions (FAQ)

Q: Why is the MB2011SS2G30-CC listed as obsolete? A: The MB2011SS2G30-CC is classified as obsolete by NKK Switches, indicating the manufacturer has discontinued active production. The active substitute MBN15SS2G30-CC is recommended for ongoing applications.

Q: What electrical parameters must match for substitution? A: The substitute part must maintain SPDT circuit configuration, 0.4VA current rating, and 28V AC/DC voltage rating to ensure functional equivalence in the application circuit.

Q: Are the mounting and termination specifications identical? A: The main part specifies through-hole, right-angle mounting with PC pin termination. Complete technical specifications for the substitute part are not fully detailed in the available data; verification against your specific PCB layout requirements is necessary.

Q: What is the difference in packaging between these parts? A: The main part packaging is not specified in the available data. The substitute part MBN15SS2G30-CC is supplied in bulk packaging format.

Q: Are there compliance differences between the main and substitute parts? A: The main part is ROHS3 compliant with MSL Level 1 rating. Compliance certifications for the substitute part are not provided in the available technical data and should be verified with the manufacturer or distributor.

Q: Can I use MBN15SS2G30-CC as a direct replacement on existing PCBs? A: Mechanical compatibility depends on identical mounting type and termination specifications. Verify that the substitute part matches your PCB hole spacing, mounting orientation, and pin configuration before implementation.