MB2011SS2G30-BC Equivalent & Substitute Parts

Part Overview

The MB2011SS2G30-BC is a pushbutton switch manufactured by NKK Switches, classified as a Standard SPDT (Single Pole Double Throw) through-hole component with right-angle mounting. This switch is rated for 0.4VA at 28V AC/DC and features a red round button actuator with PC pin termination and epoxy sealed terminals. The product is currently obsolete, making identification of compatible substitute parts essential for system maintenance, repair, and legacy equipment support.

Substiute Parts

MB2011SS2G30-BC

NKK SwitchesIn Stock: 1104MB2011SS2G30-BC Datasheet

Current PartRFQ

MBN15SS2G30-BC

NKK SwitchesIn Stock: 1091MBN15SS2G30-BC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB2011SS2G30-BC is determined by strict alignment of the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Mom momentary operation)
• Electrical ratings (0.4VA at 28V AC/DC)
• Mounting type (Through Hole, Right Angle)
• Actuator type and color (Round button, Red)
• Termination style (PC Pin)
• Environmental compliance (RoHS3, REACH Unaffected)

The identified substitute part MBN15SS2G30-BC is listed as a manufacturer-recommended alternative by NKK Switches. Substitution is valid only when all electrical and mechanical parameters align within the specified tolerances.

Parameter Comparison

Engineering Selection Recommendations

The MB2011SS2G30-BC is obsolete and no longer in active production. The MBN15SS2G30-BC is the manufacturer-designated substitute and carries Active product status, ensuring continued availability and support. Both components are manufactured by NKK Switches and maintain PC pin termination compatibility.

Selection of the MBN15SS2G30-BC is appropriate for new designs and legacy system replacements where the MB2011SS2G30-BC is no longer procurable. The substitute maintains compliance with RoHS3 requirements and is available in bulk packaging.

Frequently Asked Questions (FAQ)

Q: Can the MBN15SS2G30-BC directly replace the MB2011SS2G30-BC in existing applications?

A: Yes, the MBN15SS2G30-BC is the manufacturer-recommended substitute. Both components share identical PC pin termination and are manufactured by NKK Switches. Verify that your application requirements align with the electrical and mechanical specifications provided in the parameter comparison table.

Q: What is the primary reason for substitution?

A: The MB2011SS2G30-BC is obsolete. The MBN15SS2G30-BC is an active product that provides equivalent functionality and is available for procurement.

Q: Are there packaging differences between these parts?

A: The MB2011SS2G30-BC is supplied with standard packaging, while the MBN15SS2G30-BC is available in Bulk packaging. Confirm packaging requirements for your procurement process.

Q: Do both parts meet the same compliance standards?

A: The MB2011SS2G30-BC is ROHS3 Compliant and REACH Unaffected. Compliance information for the MBN15SS2G30-BC should be confirmed with the manufacturer or distributor.

Q: What are the key electrical parameters that must match for substitution?

A: Circuit configuration (SPDT), switch function (On-Mom), current rating (0.4VA), and voltage rating (28V AC/DC) are the critical electrical parameters that determine substitution compatibility.