MB2011SS2G13-CB Equivalent & Substitute Parts

Part Overview

The MB2011SS2G13-CB is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with momentary on-function operation. This through-hole mounted component is rated for 0.4VA at 28V AC/DC and is designed for standard panel-mount applications with epoxy sealed terminals. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations where legacy compatibility is required.

Substiute Parts

MB2011SS2G13-CB

NKK SwitchesIn Stock: 976MB2011SS2G13-CB Datasheet

Current PartRFQ

MBN15SS2G13-CB

NKK SwitchesIn Stock: 945MBN15SS2G13-CB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB2011SS2G13-CB is determined by the following critical parameters:

• Circuit configuration (SPDT requirement)
• Switch function (momentary on-function)
• Electrical ratings (0.4VA at 28V AC/DC)
• Mounting interface (through-hole with PC pin termination)
• Actuator type and color (round button, white)
• Operating temperature range (-30°C to 85°C)
• Mechanical and electrical life specifications
• Compliance certifications (RoHS3, REACH Unaffected)

The substitute part MBN15SS2G13-CB is identified as a functionally equivalent alternative based on manufacturer designation and compatibility with the electrical and mechanical parameters specified for this product category.

Parameter Comparison

Engineering Selection Recommendations

The MB2011SS2G13-CB is designated as obsolete by the manufacturer. For applications requiring this component, the MBN15SS2G13-CB is identified as the manufacturer-recommended substitute. The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

Both components are manufactured by NKK Switches and maintain RoHS3 compliance and REACH unaffected status, supporting regulatory requirements for electronic equipment. The transition from the obsolete MB2011SS2G13-CB to the active MBN15SS2G13-CB is supported by manufacturer designation and should be evaluated within the context of specific application requirements and mechanical integration constraints.

Frequently Asked Questions (FAQ)

Q: What makes MBN15SS2G13-CB a suitable substitute for MB2011SS2G13-CB?

A: MBN15SS2G13-CB is designated by NKK Switches as the manufacturer-recommended substitute. Both components are produced by the same manufacturer and share compatible electrical and mechanical interfaces within the pushbutton switch product category.

Q: Are there compliance differences between the main part and substitute?

A: Both the MB2011SS2G13-CB and MBN15SS2G13-CB maintain RoHS3 compliance and REACH unaffected status, ensuring regulatory alignment for electronic equipment applications.

Q: What is the significance of the product status change from Obsolete to Active?

A: The transition from obsolete to active status indicates that MBN15SS2G13-CB is currently in production and available through normal supply channels, providing improved long-term availability compared to the discontinued MB2011SS2G13-CB.

Q: How do packaging differences affect component selection?

A: The main part is supplied with standard packaging, while the substitute is available in bulk packaging. Packaging selection should be based on procurement volume requirements and inventory management practices.

Q: What parameters should be verified when implementing the substitute part?

A: Mechanical mounting dimensions, PC pin termination compatibility, and panel cutout alignment should be confirmed against application-specific requirements to ensure proper installation and electrical performance.