MB2011SS2G13-BC Equivalent & Substitute Parts

Part Overview

The MB2011SS2G13-BC is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with a 0.4VA current rating at 28V AC/DC. This through-hole mounted component is designed for standard applications requiring momentary on-off switching functionality with a red round button actuator.

The MB2011SS2G13-BC is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this component.

Substiute Parts

MB2011SS2G13-BC

NKK SwitchesIn Stock: 770MB2011SS2G13-BC Datasheet

Current PartRFQ

MBN15SS2G13-BC

NKK SwitchesIn Stock: 799MBN15SS2G13-BC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MB2011SS2G13-BC must maintain electrical and mechanical compatibility based on the following critical parameters:

Electrical Compatibility Requirements:

• Circuit configuration: SPDT
• Switch function: On-Mom (momentary operation)
• Current rating: 0.4VA minimum
• Voltage rating: 28V AC/DC minimum

Mechanical Compatibility Requirements:

• Mounting type: Through Hole
• Actuator type: Round, Button
• Termination style: PC Pin
• Operating temperature range: -30°C to 85°C or broader

Compliance Requirements:

• RoHS3 compliance
• MSL rating: 1 or equivalent

The substitute part MBN15SS2G13-BC is identified as a functionally equivalent alternative from the same manufacturer, NKK Switches, meeting the electrical and mechanical parameters necessary for direct substitution in applications currently utilizing the MB2011SS2G13-BC.

Parameter Comparison

Engineering Selection Recommendations

The MBN15SS2G13-BC is the recommended substitute for the obsolete MB2011SS2G13-BC. Both components are manufactured by NKK Switches and share identical electrical specifications (SPDT, 0.4VA, 28V AC/DC) and mechanical characteristics (through-hole mounting, round button actuator, PC pin termination).

The primary distinction is product status: the MB2011SS2G13-BC is obsolete, while the MBN15SS2G13-BC maintains active production status. Both parts maintain ROHS3 compliance and equivalent moisture sensitivity ratings, ensuring regulatory and environmental compliance continuity.

For new designs or ongoing production requiring this component category, the MBN15SS2G13-BC provides assured supply chain availability and manufacturer support while maintaining full electrical and mechanical compatibility with existing applications.

Frequently Asked Questions (FAQ)

Q: Can MBN15SS2G13-BC be used as a direct replacement for MB2011SS2G13-BC in existing designs?

A: Yes. Both components share identical electrical ratings (SPDT, 0.4VA, 28V AC/DC), mechanical mounting characteristics (through-hole, round button actuator, PC pin termination), and operating temperature ranges. Direct substitution is supported without circuit modification.

Q: What is the primary reason for substitution?

A: The MB2011SS2G13-BC is classified as obsolete. The MBN15SS2G13-BC is the active equivalent from the same manufacturer, ensuring continued availability and manufacturer support.

Q: Are there compliance differences between these parts?

A: No. Both components maintain ROHS3 compliance and equivalent moisture sensitivity levels (MSL 1), ensuring regulatory continuity.

Q: What packaging formats are available?

A: The MB2011SS2G13-BC is available in standard packaging. The MBN15SS2G13-BC is supplied in bulk packaging format.

Q: Are the mechanical life and electrical life specifications identical?

A: The MB2011SS2G13-BC specifies 100,000 mechanical cycles and 50,000 electrical cycles. Verify equivalent specifications for the MBN15SS2G13-BC with the manufacturer for applications with specific cycle life requirements.