MB2011SS1G30 Equivalent & Substitute Parts

Part Overview

The MB2011SS1G30 is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with 0.4VA current rating at 28V AC/DC. This component is designed for panel mount applications with right angle, rear termination using PC pins. The product is currently obsolete, making identification of suitable substitute components essential for ongoing maintenance, repair, and legacy system support.

Substiute Parts

MB2011SS1G30

NKK SwitchesIn Stock: 810MB2011SS1G30 Datasheet

Current PartRFQ

MBN15SS1G30

NKK SwitchesIn Stock: 925MBN15SS1G30 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB2011SS1G30 is determined by the following critical parameters:

• Circuit configuration (SPDT)
• Current and voltage ratings (0.4VA at 28V AC/DC)
• Mounting type (Panel Mount, Right Angle, Rear)
• Termination style (PC Pin)
• Switch function (On-Mom momentary operation)
• Panel cutout dimensions (Circular 6.50mm Dia)
• Operating temperature range (-30°C ~ 85°C)
• Mechanical and electrical life specifications

The substitute part MBN15SS1G30 is identified as a manufacturer-recommended equivalent within the NKK Switches product portfolio. Substitution is valid when all critical electrical parameters, mechanical mounting characteristics, and environmental specifications align with the original component requirements.

Parameter Comparison

Engineering Selection Recommendations

The MBN15SS1G30 is designated as the manufacturer-recommended substitute for the obsolete MB2011SS1G30. Selection of this substitute is supported by:

• Active product status, ensuring ongoing availability and supply chain continuity
• Manufacturer recommendation from NKK Switches, indicating validated electrical and mechanical compatibility
• Common manufacturer origin, reducing integration risk in legacy system applications

When implementing the MBN15SS1G30 as a replacement, verification of complete electrical specifications and mechanical fit within the target application is required, as certain parameters are not provided in the available documentation.

Frequently Asked Questions (FAQ)

Q: Why is the MB2011SS1G30 no longer available? A: The MB2011SS1G30 is classified as obsolete by NKK Switches. Substitute components are necessary to maintain system functionality and support ongoing repairs.

Q: What makes MBN15SS1G30 a valid substitute? A: MBN15SS1G30 is the manufacturer-recommended equivalent from NKK Switches. Both components share the same manufacturer origin, supporting validated compatibility for SPDT pushbutton switch applications.

Q: Are there electrical parameter differences between the original and substitute? A: Complete electrical specifications for the MBN15SS1G30 are not provided in the available documentation. Consultation of the MBN15SS1G30 datasheet is necessary to confirm alignment with the original 0.4VA at 28V AC/DC rating.

Q: What is the panel cutout requirement for installation? A: The original MB2011SS1G30 requires a circular panel cutout of 6.50mm diameter. Mechanical compatibility of the substitute must be verified against this specification.

Q: Are both components RoHS compliant? A: The MB2011SS1G30 is ROHS3 compliant. RoHS compliance status for the MBN15SS1G30 is not specified in the provided data and should be verified independently.

Q: What is the operating temperature range? A: The MB2011SS1G30 operates within -30°C to 85°C. Confirmation that the MBN15SS1G30 meets this temperature range is necessary before substitution in temperature-sensitive applications.