MB2011SB3G03 Equivalent & Substitute Parts

Part Overview

The MB2011SB3G03 is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with momentary operation. This component is rated for 0.4VA at 28V AC/DC and is designed for panel mount rear installation with PC pin termination. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and component procurement.

Substiute Parts

MB2011SB3G03

NKK SwitchesIn Stock: 927MB2011SB3G03 Datasheet

Current PartRFQ

MBN15SB3G03

NKK SwitchesIn Stock: 788MBN15SB3G03 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB2011SB3G03 is determined by the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (Momentary operation)
• Electrical ratings (0.4VA at 28V AC/DC)
• Mounting interface (Panel Mount, Rear with PC Pin termination)
• Physical form factor (12.50mm circular panel cutout)
• Environmental sealing (IP67 rating)
• Operating temperature range (-30°C ~ 85°C)
• Mechanical and electrical life specifications (50,000 cycles minimum)

The substitute part MBN15SB3G03 is identified as a functionally equivalent alternative manufactured by NKK Switches. This part maintains compatibility across the critical electrical and mechanical parameters required for direct substitution in applications currently utilizing the MB2011SB3G03.

Parameter Comparison

Engineering Selection Recommendations

The MBN15SB3G03 is the designated substitute for the obsolete MB2011SB3G03. Both components are manufactured by NKK Switches and maintain identical electrical and mechanical specifications across all critical parameters. The primary distinction is product status: the MB2011SB3G03 is obsolete, while the MBN15SB3G03 is active and currently available for procurement.

Both parts maintain ROHS3 compliance and are suitable for applications requiring SPDT momentary pushbutton switches rated for 28V AC/DC operation with IP67 environmental protection. The active status of MBN15SB3G03 ensures continued availability and supply chain reliability for new designs and component replacement applications.

Frequently Asked Questions (FAQ)

Q: Can MBN15SB3G03 directly replace MB2011SB3G03 in existing applications?

A: Yes. Both components share identical electrical ratings (0.4VA at 28V AC/DC), circuit configuration (SPDT), switch function (momentary), mounting interface (panel mount rear with PC pin termination), and environmental specifications (IP67). Physical form factor compatibility is confirmed through matching 12.50mm circular panel cutout dimensions.

Q: What is the primary reason for substitution?

A: The MB2011SB3G03 is classified as obsolete. The MBN15SB3G03 is the active equivalent part from the same manufacturer, ensuring continued component availability and supply chain continuity.

Q: Are there any compliance differences between these parts?

A: Both parts are ROHS3 compliant and maintain equivalent regulatory status. No compliance barriers exist for substitution.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is based on matching circuit configuration (SPDT), electrical ratings (0.4VA at 28V AC/DC), switch function (momentary operation), mounting type (panel mount rear), termination style (PC pin), panel cutout dimensions (12.50mm circular), ingress protection rating (IP67), and operational life specifications (50,000 cycles minimum).

Q: Are packaging considerations relevant for this substitution?

A: Both parts are supplied in bulk packaging. No packaging-related compatibility issues exist for direct component substitution.