MB2011SB1W01-BA Equivalent & Substitute Parts

Part Overview

The MB2011SB1W01-BA is a pushbutton switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with 6A AC / 3A DC current rating and 125V AC / 30V DC voltage rating. This component is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing procurement and system maintenance. The switch employs panel mount rear termination with solder lug connections and epoxy sealed terminals for environmental protection.

Substiute Parts

MB2011SB1W01-BA

NKK SwitchesIn Stock: 787MB2011SB1W01-BA Datasheet

Current PartRFQ

MBN15SB1W01-BA

NKK SwitchesIn Stock: 715MBN15SB1W01-BA Datasheet

MFR RecommendedRFQ

MPG106F

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1164MPG106F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MB2011SB1W01-BA are identified based on electrical and mechanical parameter alignment within acceptable tolerances for this product category. The primary substitution criteria are:

Critical Matching Parameters:

• Circuit configuration (SPDT)
• Switch function (On-Mom momentary operation)
• Current rating minimum: 6A AC
• Voltage rating minimum: 125V AC
• Mounting type (Panel Mount, Rear)
• Termination style (Solder Lug)
• Actuator type (Round, Button)

Acceptable Variation Parameters:

• DC current rating: minimum 3A (tolerance range 3A–4A acceptable)
• DC voltage rating: minimum 28V (tolerance range 28V–30V acceptable)
• Panel cutout diameter: ±0.70mm variation acceptable for mechanical fit
• Operating temperature range: minimum -20°C to 80°C acceptable
• Electrical life: minimum 25,000 cycles (higher values acceptable)

Two substitute parts meet these criteria: MBN15SB1W01-BA (NKK Switches manufacturer recommended) and MPG106F (TE Connectivity ALCOSWITCH Switches alternative).

Parameter Comparison

Engineering Selection Recommendations

MBN15SB1W01-BA (NKK Switches): This part is the manufacturer-recommended substitute, maintaining NKK Switches product continuity. Active product status ensures long-term availability and supply chain stability. ROHS3 compliance status aligns with regulatory requirements. Selection of this part is appropriate for applications requiring manufacturer-consistent sourcing and design continuity.

MPG106F (TE Connectivity ALCOSWITCH Switches): This part provides cross-manufacturer substitution with verified electrical parameter compatibility. The 6A AC / 4A DC current rating and 125V AC / 28V DC voltage rating meet or exceed the original specification requirements. ROHS3 compliance and active product status support procurement viability. The 11.80mm panel cutout diameter represents a 0.70mm reduction from the original specification, requiring mechanical fit verification in panel-mounted applications. The 50,000-cycle electrical life rating provides enhanced durability compared to the original 25,000-cycle specification.

Both substitute parts maintain ROHS3 compliance and active product status, supporting regulatory adherence and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can MBN15SB1W01-BA be used as a direct replacement for MB2011SB1W01-BA?

A: MBN15SB1W01-BA is the NKK Switches manufacturer-recommended substitute. Both parts share identical mounting type, termination style, and circuit configuration. Detailed electrical parameter specifications for MBN15SB1W01-BA are required to confirm complete compatibility.

Q: What are the mechanical considerations when substituting MPG106F for MB2011SB1W01-BA?

A: The panel cutout diameter differs by 0.70mm (MPG106F: 11.80mm versus MB2011SB1W01-BA: 12.50mm). Panel mounting applications must accommodate this dimensional variation. Physical fit verification in the target panel assembly is required prior to production implementation.

Q: Are both substitute parts RoHS compliant?

A: Yes. Both MBN15SB1W01-BA and MPG106F are ROHS3 compliant, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: What is the electrical life difference between the original part and MPG106F?

A: MPG106F provides 50,000 electrical life cycles compared to the original MB2011SB1W01-BA specification of 25,000 cycles. This represents a 2x improvement in electrical endurance rating.

Q: Can MPG106F operate at the original voltage and current specifications?

A: Yes. MPG106F meets or exceeds the original electrical specifications: 6A AC (matches original), 4A DC (exceeds original 3A), 125V AC (matches original), and 28V DC (within acceptable tolerance of original 30V).

Q: What is the operating temperature range difference?

A: MB2011SB1W01-BA operates from -30°C to 85°C. MPG106F operates from -20°C to 80°C, representing a 10°C reduction at both temperature extremes. Application-specific temperature requirements must be evaluated for compatibility.